Page 1 of 1
Electrolysis/ hho genorstor
Posted: Sat Jul 12, 2008 1:04 am
by ajb12345
I am building an hho generator aka electrolisiser. I was wondering if I could use abs in this case. You know the black stuff at home depot. Thnx for the help
Posted: Sat Jul 12, 2008 2:27 am
by Tom
Are you going to use the electrolyzer at high pressure?
G's from the Dutch, Tom
Posted: Sat Jul 12, 2008 6:32 am
by TurboSuper
I'm using ABS in mine, shouldn't be an issue since you don't want HHO at a very high pressure anyhow.
Posted: Sat Jul 12, 2008 10:58 am
by ajb12345
that's what I thought since you can buy bigger diameter abs than PVC at home depot
Posted: Sat Jul 12, 2008 11:02 am
by jimmy101
You should look up the chemical compatability of ABS and strong bases like NaOH (sodium hydroxide). Eventually, to get the best performance from the cell you'll probably want to use NaOH (or other strong base) as the electrolyte.
Pressure shouldn't be a problem as long as you are sure there is no possible way for the gas outlets to get plugged. Running a sealed electrolysis cell may well build up enought pressure to rupture ABS (or PVC).