Page 53 of 55
Re: Knife Thread
Posted: Thu Oct 24, 2013 4:51 pm
by jackssmirkingrevenge
Nice!
I would be afraid to fap in the presence of that thing
Re: Knife Thread
Posted: Thu Oct 24, 2013 6:01 pm
by Fnord
^
It's always amusing when the thread starts a new page and I jump in and catch something like this completely out of context.
Edit; to make this post more useful, here's something relevant I made a while back.
(what, you didn't think I'd been doing nothing at all while I was away, did you?)
Total length ~ 16 inches
Re: Knife Thread
Posted: Fri Oct 25, 2013 4:26 am
by jackssmirkingrevenge
Fnord wrote:(what, you didn't think I'd been doing nothing at all while I was away, did you?)
Well glaze my nipples and call me Rita!
Bloody impressive work, wish I had the time for this knifemaking lark.
The stamping, did you actually make a stamp with the emblem or hammer it in following a pattern with something slightly more sophisticated that a screwdriver?
Re: Knife Thread
Posted: Fri Oct 25, 2013 6:51 am
by Fnord
I just hammered it in. Broken allen wrenches make great punches for detailing work.
Not sure how to make stamps that are intended for steel; I'd think you'd either need a mill or a *very* steady hand.
Re: Knife Thread
Posted: Fri Oct 25, 2013 6:54 am
by jackssmirkingrevenge
Fnord wrote:Not sure how to make stamps that are intended for steel; I'd think you'd either need a mill or a *very* steady hand.
Acid etching would be a relatively painless way of doing it, following by heat treatment to harden the punch itself.
Re: Knife Thread
Posted: Fri Oct 25, 2013 8:49 pm
by sagthegreat
http://www.bladeforums.com/forums/showt ... ascus-MOAB
This knife is made from a damascus steel made of titanium, its so sexy
Re: Knife Thread
Posted: Sat Oct 26, 2013 7:03 am
by jackssmirkingrevenge
Timascus lol.
Awesome!
Re: Knife Thread
Posted: Mon Nov 04, 2013 2:02 pm
by jakethebeast
Damn nice work on the dagger! Cant wait to get my shop done to make something nice...
In the mean time, my first 3D printed knife! Well, the handle is 3D printed and the blade just a storebought... But had to be able to test it!
Re: Knife Thread
Posted: Mon Nov 04, 2013 3:37 pm
by dart guy
I'm waitin for 3d printed pocket knives.
Re: Knife Thread
Posted: Tue Nov 05, 2013 5:49 pm
by jakethebeast
hehe printknife is pretty much done. Printed the shieth insert and wrapped it in 3mm pressed bullhide. As its for me, and i have my own preferences, check the belt "loop"
Re: Knife Thread
Posted: Wed Nov 06, 2013 5:32 am
by jackssmirkingrevenge
Noice!
Have you thought about using 3D printing as a "lost wax" method of casting from metal? Or making moulds and casting from urethanes or similar?
Re: Knife Thread
Posted: Wed Nov 06, 2013 9:01 am
by Heimo
Here are 2 small pocket knives my dad is busy making that is not completely done yet....
Re: Knife Thread
Posted: Wed Nov 06, 2013 9:12 am
by jackssmirkingrevenge
That's a pretty awesome Dad you got there
Those screws look like they were taken from a Nokia 3310...
Re: Knife Thread
Posted: Wed Nov 06, 2013 9:23 am
by Heimo
jackssmirkingrevenge wrote:That's a pretty awesome Dad you got there
Those screws look like they were taken from a Nokia 3310...
hehe those silver coloured screws were recycled from old hard drives, one place to find that size screw, the other golden coloured screws are actually bought screws that is gold plated...
Edit:
another WIP pic:
Re: Knife Thread
Posted: Sun Nov 17, 2013 1:04 pm
by bahur47
Here's my first try on knives. Its made out of an old file. Blade - 180 ,handle - 130 ,thickness - 7 mm . For now im too lazy to make saya
. And a keyholder just for the lulz