Page 55 of 78

Two shots at last: Over/Under Slingshot Crossbow

Posted: Sun Sep 26, 2010 4:24 pm
by JoergS
I have invested about 8 hours of work to make my first two-shot slingshot crossbow.

I still don't have access to my welding gear, lathe and mill, so I had to do it in wood.

I wanted it to be as strong as my most powerful onces - but per "barrel". So it had to be really sturdy, bulky and a bit bizarre. But it works like a charm.

The trigger mechanism allows me to shoot one barrel after the other or two at the same time. A really, really simple lever serves as thr trigger.

Due to the necessary thickness of the rubber involved, I had to make the fork really high. But that is not so bad as this weapon has to be cocked like a crossbow, with your foot stomping down on the rear stock and both hands pulling up the fork. Also the "barrel" had to be aluminum, thin wood is not strong enough for this DOUBLE HUNTER BAND shooting device.

The concept works, and once done in steel, it won't be bulky at all.

Here is the video:

[youtube][/youtube]

Jörg

Image

Image

Image

Posted: Sun Oct 03, 2010 1:48 pm
by JoergS
What would happen if someone invents a machine gun slingshot and fires at a chicken? This scenario is simulated here, with a conventional homemade slingshot and a supermarket chicken.

The machine gun effect is simulated by editing the shots down to ten frames each, so that it looks like the whole 49 hits happened in just 20 seconds.

The 1,99 Euro supermarket chicken is torn to shreds, a spectactular and somewhat disgusting video - brought to you by The Slingshot Channel!

DO NOT WATCH IT IF YOU CAN'T SEE FOOD DESTROYED



Jörg

Posted: Sun Oct 03, 2010 8:25 pm
by twizi
thats some tenderized chicken :D
very good cant wait to see more sling shots

Posted: Tue Oct 05, 2010 12:18 am
by JoergS
Here is the video about the slingshot with integrated band heating system.


Posted: Tue Oct 05, 2010 12:24 am
by JoergS
As announced, I have made a slingshot that heats its bands. I want to be able to break records even when it is NOT humid and hot outside! So there was no alternative.

I used water filled copper tubes, as water and copper have the highest available heat capacity.

The bands are put over the copper pipes that are filled with hot water, then the insulation is closed over the bands. They heat up in no time, about ten seconds from room temp to over 50 centigrade. I filled the tubes with hot, but not boiling water as I am not sure how much heat they tolerate.

The slingshot is ugly as heck, but not a bad shooter, it is a "W" after all. And the copper pipes work like a stabilizer.

Image

Image

Image

Image

Here is the video:

http://www.youtube.com/watch?v=i7ZO2-Rc_Hk

Jörg

Posted: Sun Oct 10, 2010 1:54 pm
by JoergS
I wanted to further enhance my "Cutlass" design, with a solid plate against hand slaps. I also looked at the way Bill Hays stabilized the grip with a backwards directed "hook", and liked that idea a lot.

The result is a slingshot that is basically a "Phoenix", but with a front and back part laminated to it. The front part holds the shield, the back part the hook. Both parts thicken the handle and give it the "Cutlass" palm swell.

I also added a "Baumstamm" style lanyard.

This is a great shooter.

Image

Image

Image

Image

Here is the video:



Jörg

The African Godess of Slingbows

Posted: Sat Oct 16, 2010 12:35 pm
by JoergS
I revisited the sling bow today, inspired by Fish (he made a sling bow a while ago, but posted the video again here in a different thread).

I had a few tasks.

First, I wanted to eliminate all the dead play.

Second, no handslaps.

Third, a conventional bow release had to work.

Fourth, I wanted a quality arrow guide for accuracy.

Image

Image

Image

Image

Image

So I made the "bow" 40 cm long, and the bands are a bit pretensed in unloaded mode. This way, no dead play at all!

Then, I put a Hover arrow rest (kind of a whisker buiscuit) INSIDE of the bow, right in the middle.

The bands can never touch the arrow rest (a big problem with sling bows usually).

Next, I designed the bow arms in a way that the bands are effectively stopped and can not slap on my hand.

I formed the "cable" from some paracord, with a loop for the release (otherwise the angle is so steep that the arrow falls out in full cocked position).

This shoots great! It is the best sling bow I have made so far.

Weight is 550 gramms (1,2 lbs), complete with bands. It looks a bit like an African sculpture, that is the reason for the name.

Too bad is rains so hard that I can't do a video today, hopefully tomorrow will be better. But I have to finish the Scallops video first.

Jörg

Posted: Sat Oct 16, 2010 1:02 pm
by boyntonstu
I am blown over by your creativity and your craftsmanship.

My roof quality plywood Slingshot-On-A Stick saw your bow and it is ashamed to be on the same forum as your creations.

Wow!

Posted: Sat Oct 16, 2010 5:26 pm
by JoergS
Wow, Stu, that is a response worth printing out and framing.

Thanks!

Jörg

Posted: Sun Oct 17, 2010 10:02 am
by JoergS
Here is the video:

[youtube][/youtube]

Posted: Mon Oct 18, 2010 3:14 pm
by JoergS
I reviewed the fantastic "Scallops" slingshot, designed in Hong Kong and made in England.

This model is very special for the slingshot community, as Dan developed it in a live thread. We saw the Photoshop drawings, we saw the first moulds, we saw the first metal castings. So it was rather special to get my hands on the product!

After both Dan (the designer) and Pete (the manufacturer) have OKed the video, it is my pleasure to release it to the public.



A great slingshot, a highlight of my collection! Well done, Dan and Pete.

Jörg

Posted: Wed Oct 20, 2010 1:15 am
by jackssmirkingrevenge
Joerg, ever though of making a slingshot that mounts on a picatinny rail or similar? I bet the military would be interested in a noiseless grenade launcher :D

Image

Posted: Wed Oct 20, 2010 1:25 am
by Crna Legija
jackssmirkingrevenge wrote:Joerg, ever though of making a slingshot that mounts on a picatinny rail or similar? I bet the military would be interested in a noiseless grenade launcher :D

Image

they call them arms :roll: :D

Posted: Wed Oct 20, 2010 1:28 am
by jackssmirkingrevenge
-_- wrote:they call them arms :roll: :D
In a previous century perhaps, but these days there are better options ;)

Posted: Sun Oct 24, 2010 12:44 pm
by JoergS
After the great response to the slingshot crossbows presented here, many have asked if it can be converted for shooting arrows. Of course it can! This video presents a homemade, Thera Band powered crossbow that fires full size arrows (not the short crossbow bolts") at 213 fps (65m/s).

Image

Image

Image

The mechanism is very simple, yet effective. The weapon has a built in arrow rest that fixes the arrow in loaded condition.

The result is a long, but very narrow crossbow. It is accurate and powerful.

Also, at the end of the video you can learn how to participate in a drawing. The price: A customized "Cougar Limited Edition" slingshot, with hand crafted Thuja wood scales. If you want to participate, you have to be a member of http://www.slingshotforum.com, and introduce yourself in the "Welcome Forum". The membership is free.

Deadline is November 15, 2010.

There is a 2D version and a 3D version of the video, as the production is shot with the new Panasonic HDC-SDT750 3D camera. The 3D version is viewable as well, the link will be published at a later time.

Here is the 2D video:

[youtube][/youtube]

Jörg