Page 2 of 2

Posted: Wed Aug 04, 2010 6:28 pm
by irisher
is there an adapter that goes in the regulator to go to npt threads?
Absolutely. I just went and bought one at my paintball store. It was pretty cheap and goes from the male paintball thread to male 1/4" threads.

Posted: Wed Aug 04, 2010 6:30 pm
by Gun Freak
Cool, so I'd get one of those and a quick connect to go straight to my gun. Sweet! Now all I need to find is that Low Pressure Regulator... I might have to get it on amazon for 50 bucks.

Posted: Wed Aug 04, 2010 6:32 pm
by Gun Freak
What about these?
This one is cheap but has no gauge.
http://www.amazon.com/STD-Proto-JDS-LPR ... 526&sr=1-6
This was is more expensive, still no gauge though.
http://www.amazon.com/STD-Proto-JDS-LPR ... 526&sr=1-6
But I can fit a gauge after it. Are the regs universal, like they fit all the hoses and the threads are the same?

Posted: Wed Aug 04, 2010 6:38 pm
by irisher
I would assume they have universal threads but, I can't guarantee it. Its a shame my reg isn't for sale anymore it was $20 and had a gauge.

Posted: Wed Aug 04, 2010 6:49 pm
by Gun Freak
Yeah that would be a nice one to get, but since it regs down to low pressure, adding a normal gauge to it would be cheap and easy.
Can you have a look at this page for me and find a good reg?

Posted: Wed Aug 04, 2010 6:50 pm
by irisher
The link is broken.

Posted: Wed Aug 04, 2010 6:53 pm
by Gun Freak
Sorry I just realized, its fixed :wink:

Posted: Wed Aug 04, 2010 11:07 pm
by jackssmirkingrevenge
Gun Freak wrote:I keep seeing all these tanks with regs, so the tank reg brings the HPA from 3000 psi down to 800 right, but then, what reg do I use to get it from 800 down to below 200? Can anybody link me one from amazon.com?
My Ninja tanks have a shim adjustable reg, they can go down to 450-500 psi. Instead of spending money to go lower, you could achieve the same effect by having a flow restriction on your trigger.

In vague terms it's how the WWII PAW 600 works, the so called high-low pressure system.