Page 328 of 436

Unread postPosted: Fri Mar 29, 2013 9:28 pm
Author: POLAND_SPUD
[youtube]http://www.youtube.com/watch?v=NKXVcUSBKH4[/youtube]Interesting stuff

Unread postPosted: Sat Mar 30, 2013 3:39 pm
Author: POLAND_SPUD
another amazing vid but copenhagen suborbitals

[youtube]http://www.youtube.com/watch?v=p6BC1QfA0Ug[/youtube]

Unread postPosted: Sat Mar 30, 2013 10:57 pm
Author: jsefcik
Custom machined aluminum piston is complete!!! Now to pay jacksrevenge!


Great work !!! Took a lil time but time is where quality comes in place!!! Awesome!!!

Unread postPosted: Sun Mar 31, 2013 7:35 am
Author: jrrdw
jsefcik wrote:Custom machined aluminum piston is complete!!! Now to pay jacksrevenge!


Great work !!! Took a lil time but time is where quality comes in place!!! Awesome!!!


Just wondering, what are you paying him for? I have your piston and valve...

One more question for ya, who is "jacksrevenge"? Does anyone else reconize that particular member name?

You been waking and baking lately??? SUP...

Unread postPosted: Sun Mar 31, 2013 12:30 pm
Author: jsefcik
jrrdw wrote:
jsefcik wrote:Custom machined aluminum piston is complete!!! Now to pay jacksrevenge!


Great work !!! Took a lil time but time is where quality comes in place!!! Awesome!!!


Just wondering, what are you paying him for? I have your piston and valve...

One more question for ya, who is "jacksrevenge"? Does anyone else reconize that particular member name?

You been waking and baking lately??? SUP...



Lol I couldnt remember the abrevation for his username,,, he machined a piston out of aluminum for me, I just have to wait for a paycheck to come in

Unread postPosted: Sun Mar 31, 2013 4:45 pm
Author: jackssmirkingrevenge
jsefcik wrote:Lol I couldnt remember the abrevation for his username,,, he machined a piston out of aluminum for me, I just have to wait for a paycheck to come in


I did? wow, I must be machining in my sleep! Pretty sure it was jrrdw who made it...

Unread postPosted: Sun Mar 31, 2013 5:21 pm
Author: Gippeto
"Adventures with Jesse". :lol:

Moving on....

To...

"Adventures with Rust bluing". :D

From this;

Image


To this;

Image

Unread postPosted: Sun Mar 31, 2013 6:01 pm
Author: jrrdw
jackssmirkingrevenge wrote:
jsefcik wrote:Lol I couldnt remember the abrevation for his username,,, he machined a piston out of aluminum for me, I just have to wait for a paycheck to come in


I did? wow, I must be machining in my sleep! Pretty sure it was jrrdw who made it...


Wakie bakie! L0L....Wake up Jessie!

Yup.

Unread postPosted: Sun Mar 31, 2013 7:51 pm
Author: mattyzip77
Pay your bills Jesse... Lay off that wacky tobaccy too.. :wink:

Unread postPosted: Sun Mar 31, 2013 10:20 pm
Author: jsefcik
jackssmirkingrevenge wrote:
jsefcik wrote:Lol I couldnt remember the abrevation for his username,,, he machined a piston out of aluminum for me, I just have to wait for a paycheck to come in


I did? wow, I must be machining in my sleep! Pretty sure it was jrrdw who made it...



Yes it was sorry man, but yes he did an amazing job


Ill try to lay off the wacky tobacco no gaurntees !

Unread postPosted: Mon Apr 01, 2013 12:51 am
Author: jackssmirkingrevenge
Gippeto wrote:"Adventures with Rust bluing"


Fantastic!

Is this the process you used?

The process was to coat the gun parts in an acid solution, let the parts rust uniformly, then immerse the parts in boiling water to stabilize the rusting process by removing any remaining residue from the applied acid solution. Then the rust was carded (scrubbed) off, using a carding brush or wheel. A carding brush is a wire brush with very soft, thin (usually about .002 thick) wires. This process is repeated until the desired depth of color is achieved or the metal simply will not color any further. This is one of the reasons rust and fume bluing tend to be more rust resistant than any other method. The parts are then oiled and allowed to stand overnight. This process leaves a deep blue/black finish.

Unread postPosted: Mon Apr 01, 2013 8:19 am
Author: Gippeto
Pretty much...the boil doesn't remove residue from the acid though. It converts red iron oxide to black iron oxide.

When the color is reached, the part is boiled again in a mild baking soda solution, then rinsed and carded under running water. Some folks then oil hot...some cold...some guys use wax.

Distilled or deionized water through out the process. I used degreased 0000 steel wool for carding.

Unread postPosted: Mon Apr 01, 2013 1:47 pm
Author: Labtecpower
Very nice looking!
what kind of acid did you use in the process?
I might try this for a nice finish on some parts, makes it possible to use mild steel :D

Unread postPosted: Mon Apr 01, 2013 2:38 pm
Author: tigerblues28
Lookin' pretty sick,
But I don't understand the scope on the pistol, or on any pistol.
Maybe add a detachable stock for even better stability and accuracy?
Hmmm

Unread postPosted: Mon Apr 01, 2013 5:06 pm
Author: jakethebeast
Nice blueing! Sadly i didn't get my 2240 for my project... well, need to keep searching