Page 1 of 1

Paint grenade (old thread got cluttered)

Posted: Sun Oct 29, 2006 9:47 am
by pyromanic13
http://img97.imageshack.us/my.php?image ... loost5.png

so... I'll try to explain it.

I'm starting from the point where everthing is setup (burstdisk, paint, pressurised)

-you pull the pin with your hand on the lever
-you throw it
-the rubberband pulls the lever straight up aswell as pulling the small metal pole down letting a relatively slow leak of air into the second chamber
-when the first and second air chamber are equal pressures the rubber band will pull the second air chamber down
-burst disk blows sending paint flying everywhere

so, I think this'll give you enough of a time delay to be a good grenade

tell me If I forgot to explain anything, or if you see anything that'll make it not work...

-thanks.

Posted: Sun Oct 29, 2006 11:47 am
by pyromanic13
image shack has horriblt quailty sorry

Posted: Sun Oct 29, 2006 12:38 pm
by pyromanic13
any one?

Posted: Sun Oct 29, 2006 12:50 pm
by )DEMON(
Well it would be easyer to get your point across with an animation of the grenade firing. It is not the easyest diagram to understand.
Wouldn't the grenade hurt someone if it where to hit them? What if it breaks on something hard and shoots pvc everywhere?

Posted: Sun Oct 29, 2006 12:54 pm
by pyromanic13
in all probabily I'm not gonna use it in a game... I just wanna see if if can be done.

also I have no idea how to make an animation... I could make a scene by scene picture(s)

Posted: Sun Oct 29, 2006 3:50 pm
by noname
If you do use it in a game, you'll basically throw away 15-20 bucks when you chuck it...

Posted: Sun Oct 29, 2006 3:58 pm
by pyromanic13
not, if I spray paint it bright orange and only use it in freindly games with my freinds.

anybody confused on how it works?

Posted: Mon Oct 30, 2006 6:05 pm
by pyromanic13
I think I could replace the burst disk with a pop off valve... whats the largest pop off valve you guys know of?

nvm found one

but i'm not gonna replace the burst disk just yet

Posted: Tue Oct 31, 2006 7:23 pm
by pyromanic13
anybody?

Posted: Tue Oct 31, 2006 11:13 pm
by judgment_arms
Pyromaniac13, I think that a burst-disk would work better for two reasons.
One: most of the “pop-valves” I’ve seen release air slowly or at lest slower than a burst-disk.
And two: burst-disks are cheaper…I think.
Otherwise that is a vary ingenious idea. Good work.

Posted: Sat Nov 04, 2006 2:35 am
by pyromanic13
I'd get the largest pop valve mcmaster has (1") this would take up space though...

Posted: Sat Nov 04, 2006 6:20 am
by jrrdw
Dude, just build it! Trail and error will tell you more then anything! Thomas Edison didn't get the light bulb rite the first time.

Posted: Sat Nov 04, 2006 11:01 am
by )DEMON(
Here is the idea I was talking about, it is self expanitory.
I have no idea how to make the hammer. You should look into a few designs.
(don't delete this, I was talking to him about it)

Posted: Sat Nov 04, 2006 6:11 pm
by pyromanic13
^how would there be a time delay then?

Posted: Sun Nov 05, 2006 1:40 am
by )DEMON(
Well I was thinking of a wind up delay mechanism but it might just be better to make it 'explode' when it hits the ground. You can use the force of the grenade hitting the ground to trigger a sensitve mechanism.