Projects to make
I have been making a lot of things besides spudguns, and im sure a lot of people here do too. Share some projects you have made, im curious about what people on here make. Tell about your project too. Like, i made a hovercraft. Share pictures too. I will post some of mine later.
Obsolescecne is just a lack of imaginaiton-www.accrc.org
- spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
well i make rockets, explosives, anything to do with pyrotechnics. i also do alot with electronics...i love to build shit dealing with electronics... umm...me and my freinds are currently building a skatepark for us down at our community building...i bmx...
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 319 times
dude, there's a whole section of the forum devoted to such projects
hectmarr wrote:You have to make many weapons, because this field is long and short life
- Counterstriker
- Specialist 4
- Posts: 426
- Joined: Tue May 29, 2007 2:06 pm
What do you use as the ''Powder''. to power the explosives.spudthug wrote:well i make rockets, explosives, anything to do with pyrotechnics. i also do alot with electronics...i love to build crap dealing with electronics... umm...me and my freinds are currently building a skatepark for us down at our community building...i bmx...
well, still, this is for like homemade original projects. well actually i havent looked a lot in that sectionjackssmirkingrevenge wrote:dude, there's a whole section of the forum devoted to such projects
Obsolescecne is just a lack of imaginaiton-www.accrc.org
-
- Staff Sergeant
- Posts: 1596
- Joined: Fri Dec 15, 2006 3:57 pm
- Location: maryland
- Has thanked: 3 times
- Been thanked: 9 times
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
I just finished my 3 foot tall tornado simulator. It creats a 3 inch wide vortex in open air. It is soo much fun to play with.
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
I actually dont have a video camera that works right now. I might be able to borrow my friend Sam's camera tomorrow. I currently have two brand new pneumatics that I have yet to post because of this problem. One is a 1/4"
qev airsoft bb gun and the other is a 1" piston valve gun. I also have a couple sprinkler valves and a 3/4" QEV lying around...
qev airsoft bb gun and the other is a 1" piston valve gun. I also have a couple sprinkler valves and a 3/4" QEV lying around...
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
you should put mini cows and mini people on bikes in it just to make it an authentic tornadoDa Pneu Kid wrote:I just finished my 3 foot tall tornado simulator. It creats a 3 inch wide vortex in open air. It is soo much fun to play with.
"Those who are different change the world. Those who are the same keep it that way"
- iPaintball
- Corporal 2
- Posts: 695
- Joined: Sun Mar 04, 2007 8:37 pm
HAHAHA. I think I just might do that...
Summer Projects:
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
CO2 tank hybrid: Gotta fix the meter
Cane gun: Needs a pilot/fill setup
1.5" piston valve gun: Almost done
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:57 pm, edited 1 time in total.
- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
Today i was at my cousins house he wanted to play legos so i said ok. i even made legos violent. I made a lego sized ballista.
i've also made a cross bow using a half cm thick bungie cord. the little wood pieces in a carpeted room that are attached to the wall. (it was grooved for arrows-pencils) the thing you turn to open close blinds. and a release mechanism. a small square metal rod with 3 nail through it.(2 went over the spring one held the bungie cord down. it was pressed up against the wood to hold the pencil in with my sisters hairband. + tones of duck tape.
i also took the top off an rc hummer and put one of those battle robots on. one of the ones you used to be able to buy at toys r us.
i've also made a cross bow using a half cm thick bungie cord. the little wood pieces in a carpeted room that are attached to the wall. (it was grooved for arrows-pencils) the thing you turn to open close blinds. and a release mechanism. a small square metal rod with 3 nail through it.(2 went over the spring one held the bungie cord down. it was pressed up against the wood to hold the pencil in with my sisters hairband. + tones of duck tape.
i also took the top off an rc hummer and put one of those battle robots on. one of the ones you used to be able to buy at toys r us.
:pottytrain3:
Oh may God help us all!!! The KKK is going to overrun this forum!!! Lol, I'll make kkk avatars for spudbux!! No, seriously. PM me if with your idea and we will get to business. (I will tell you if its too hard, or if I'm feeling to lazy at the moment to do it.)
Anyways, I do all sorts of stuff, but most of them include solid propellants and cannons, so, I can't really discuss them on this forum. .
Oh yeah, but I do like to mess around with rc and I hope to build an rc tank or something. I have an rc F1 racer with a revolutionary design, and a hovercraft that uses gas plane engines in the works. However, due to my extremely busy school schedule, (I should be writing my essays right now , I will have to put those projects off until summer. I will most definitely post them when they are finished though.
Anyways, I do all sorts of stuff, but most of them include solid propellants and cannons, so, I can't really discuss them on this forum. .
Oh yeah, but I do like to mess around with rc and I hope to build an rc tank or something. I have an rc F1 racer with a revolutionary design, and a hovercraft that uses gas plane engines in the works. However, due to my extremely busy school schedule, (I should be writing my essays right now , I will have to put those projects off until summer. I will most definitely post them when they are finished though.