QEV pnematic with PVC?
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
would it be possible to use one of these http://www.airlines-pneumatics.co.uk/we ... de=S070139 or one of these http://www.airlines-pneumatics.co.uk/we ... =S07013905
on a pvc pnuematic with a 2" chamber and 1" barrel (i would use a 3/4" valve)
and i heard somewhere a 3/4" qev outperforms a 12 modded sprinkler, is
that right?
on a pvc pnuematic with a 2" chamber and 1" barrel (i would use a 3/4" valve)
and i heard somewhere a 3/4" qev outperforms a 12 modded sprinkler, is
that right?
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
so would i just need to get a 3/4" male threaded pvc fitting with a 3/4" spigot then a 3/4"-1" reducing bushing then use a 1" socket to fit it to my 1" pipe? because i don't want to buy 3/4" pipe aswell as the 1" and 2" pipe because i have to buy in expensive 3m lengths
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
ermm wt? i kno what the parts are but how where would u attach them?MaxuS wrote:1" socket - 3/4" threaded bsp male
2" socket - 1" threaded bsp male
1" - 3/4" reducing bush
As spanerman said, solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 1" reducing bush, and then screw them in (the right way round) into your 1" sprinkler valve.
I think ive explained more than was neccesary.
I think ive explained more than was neccesary.
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
how does a sprinkler valve come into this? and i will use the qev on the first link.MaxuS wrote:As spanerman said, solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 1" reducing bush, and then screw them in (the right way round) into your 1" sprinkler valve.
I think ive explained more than was neccesary.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 319 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
thanks for the link, i will probably use a the different type of qev but it still helped me understand it better.
Im a tit, i had my tennis ball launcher in my head while writing that post . Solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 3/4" (or get a 2" - 1", then a 1" - 3/4" if you cant find a 2" - 3/4") reducing bush, and then screw them in (the right way round) into your 3/4" QEV.ALIHISGREAT wrote:how does a sprinkler valve come into this? and i will use the qev on the first link.MaxuS wrote:As spanerman said, solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 1" reducing bush, and then screw them in (the right way round) into your 1" sprinkler valve.
I think ive explained more than was neccesary.
- ALIHISGREAT
- Staff Sergeant 3
- Posts: 1778
- Joined: Sat Aug 25, 2007 6:47 pm
- Location: UK
yer u r a tit . and thats what i thought u meant.MaxuS wrote:Im a tit, i had my tennis ball launcher in my head while writing that post . Solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 3/4" (or get a 2" - 1", then a 1" - 3/4" if you cant find a 2" - 3/4") reducing bush, and then screw them in (the right way round) into your 3/4" QEV.ALIHISGREAT wrote:how does a sprinkler valve come into this? and i will use the qev on the first link.MaxuS wrote:As spanerman said, solvent weld the 1" socket - 3/4" threaded bsp male onto an end of your barrel, do the same to the 2" socket onto your chamber, screw the reducing bush from the 2" threaded bsp male into the 2" - 1" reducing bush, and then screw them in (the right way round) into your 1" sprinkler valve.
I think ive explained more than was neccesary.