725PSI Solenoid Valve
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Just found a 3/4" solenoid valve for diesel applications with operating pressures of up to 725PSI, or 50BAR on an Auction site. I asked for more details, but I think it'll look similar to this:
<A HREF="http://www.trademe.co.nz/Business-farmi ... .htm">Dibs anyone...</a>
Probably too good to be true, as usual.
<A HREF="http://www.trademe.co.nz/Business-farmi ... .htm">Dibs anyone...</a>
Probably too good to be true, as usual.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Something for DYI perhaps
hectmarr wrote:You have to make many weapons, because this field is long and short life
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
adapted from hereSolar wrote:what is going on in your new avatar?
hectmarr wrote:You have to make many weapons, because this field is long and short life
- TwitchTheAussie
- Corporal 5
- Posts: 980
- Joined: Tue Feb 06, 2007 3:23 am
I want that valve. and Jacks avatar rocks
Raise your horns if you love metal.
CpTn_lAw
-spudgunning is like sex, once you've tasted, you can't wait til next time.
CpTn_lAw
- MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
No sorry, the auction ended, it has been relisted, so i'll check again.Solar wrote:Jack: haha, ok, so you mod was the inspectors FAIL grade I see.
Back on topic... any details yet Crowley?
- ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
Have you ever looked at nitrous valves? They are high pressure and I would assumer a relatively high volume valve. Or perhaps C02 solenoid valves for shifters? I am unaware of their prices but it would allow for some nice small guns to be made.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
check these out , i am wondering if they coul be moded like a sprinkler valve. http://www.vtkustoms.com/Valves.html
No they cant, those are solenoids and in no way resembly sprinkler valvesgrumpy wrote:check these out , i am wondering if they coul be moded like a sprinkler valve. http://www.vtkustoms.com/Valves.html
- bigbob12345
- Staff Sergeant
- Posts: 1516
- Joined: Sat Dec 01, 2007 9:13 am
- Location: Mercer Island,Washington
I dont see why they couldnt be modded like a sprinkler valve.
I doubt you could without matter penetrating vision. If it is a diaphragm valve I bet It would work.
Yes they are solenoid valves. And so are sprinkler valves.
Unless they are direct acting solenoid valves they will be diaphragm valves with a wide body where the diaphragm is.
Those can be modded and in fact Cornishtiger from the UKSGC boards did exactly that as can be seen here with a 1" brass solenoid valve mod.
Unless they are direct acting solenoid valves they will be diaphragm valves with a wide body where the diaphragm is.
Those can be modded and in fact Cornishtiger from the UKSGC boards did exactly that as can be seen here with a 1" brass solenoid valve mod.