Reinventing the underwater gun

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Thu Feb 28, 2008 10:33 pm

I remember a thread by Atlantis a while back where he had the idea to place a valve at the muzzle of gun rather than before the projectile. The idea was you would open the valve and the air would move out of the barrel, carrying the projectile with it like a venturi effect.

I was thinking today about how I could fire some sort of wire dart (probably .40 dart) out of a gun underwater. Using a typical gun with an open muzzle would allow the barrel to fill with water. Upon firing, the dart would have to overcome water resistance. It would not gain enough velocity to do any damage.

I thought that by using a muzzle burt disc configuration I could allow the dart to gain velocity (in air) before encountering water resistance. When it does finally encounter water resistance, the plastic cone would separate from the wire due to drag and the wire would continue through the water at high velocity. I did some tests using my Fish Killer and I did find that when firing into water the cone would separate and the wire would continue on. It easily passed through 5 feet of water and penetrated through half an inch of concrete.

Any thoughts?
Attachments
uwg.PNG
uwg.PNG (1.05 KiB) Viewed 2466 times
User avatar
Carlman
Staff Sergeant 2
Staff Sergeant 2
Posts: 1618
Joined: Sat Nov 24, 2007 1:18 am
Location: Western Australia
Been thanked: 2 times

Thu Feb 28, 2008 11:20 pm

or have you gun as normal and put a piece of cling film over the end of the barrel secured by a rubber band
Image
Aussie spudders unite!!
User avatar
ammosmoke
Sergeant
Sergeant
Posts: 1011
Joined: Wed Sep 27, 2006 10:57 am

Fri Feb 29, 2008 12:16 am

But, if the projectile wasn't the perfect tight fit, which it never is, the film would be blown off by air escaping. Well, come to think of it, that air would also prevent water from coming in, so I think you are ok if you use that idea.
User avatar
Hotwired
First Sergeant 3
First Sergeant 3
Posts: 2599
Joined: Fri Oct 13, 2006 5:51 am
Location: UK

Fri Feb 29, 2008 7:49 am

Cling film should be fine for it but why would you want an underwater gun?

Not planning on harpooning goldfish are you?
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Feb 29, 2008 8:06 am

Why not just built an ordinary pneumatic and seal the barrel? with a muzzle mounted valve, the air trying to accelerate the projectile would also have the fight pressurised air ahead of the projectile, you're better off having it accelerate through air at atmospheric pressure.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Jared Haehnel
Corporal 2
Corporal 2
Posts: 611
Joined: Tue Feb 19, 2008 4:15 pm
Location: White River Jct, Vermont

Fri Feb 29, 2008 8:51 am

fight pressurized air ahead of the projectile
Agreed... however you would also consider if go below a couple feet of water the pressure from the water will prematurely burst your burst disk...
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Feb 29, 2008 9:00 am

Jared Haehnel wrote:If you go below a couple feet of water the pressure from the water will prematurely burst your burst disk...
... so you should make it a bit stronger ;) the air flowing by the projectile will likely burst it before the projectile reaches the disk.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
Jared Haehnel
Corporal 2
Corporal 2
Posts: 611
Joined: Tue Feb 19, 2008 4:15 pm
Location: White River Jct, Vermont

Fri Feb 29, 2008 9:09 am

I kind of like the ball valve a the front of the barrel idea... I'll have to read the previous thread but it seems like it should work with reasonably light objects...

How deep do you plan on using it?
User avatar
homedepotpro
Specialist 4
Specialist 4
Posts: 443
Joined: Sun Nov 26, 2006 1:00 am

Fri Feb 29, 2008 9:55 am

i used sandwich bag material as a burst disk in my submersible gun.

http://www.spudfiles.com/forums/submers ... t9586.html

one thing to consider is every 9 feet is another atmosphere worth of pressure. so the deeper you go the more power you loose.
Image
User avatar
Fnord
First Sergeant 2
First Sergeant 2
Posts: 2239
Joined: Tue Feb 13, 2007 9:20 pm
Location: Pripyat
Been thanked: 1 time
Contact:

Fri Feb 29, 2008 11:34 am

Keep in mind being under water while firing a gun may not be great for your hearing.
Image
User avatar
Jared Haehnel
Corporal 2
Corporal 2
Posts: 611
Joined: Tue Feb 19, 2008 4:15 pm
Location: White River Jct, Vermont

Fri Feb 29, 2008 11:54 am

Keep in mind being under water while firing a gun may not be great for your hearing
:lol: thanks for thinking of the stuff we never do
User avatar
Fnord
First Sergeant 2
First Sergeant 2
Posts: 2239
Joined: Tue Feb 13, 2007 9:20 pm
Location: Pripyat
Been thanked: 1 time
Contact:

Fri Feb 29, 2008 12:26 pm

I was referring to homedepotpro's post, which implied actually being underwater while firing.
Image
User avatar
Jared Haehnel
Corporal 2
Corporal 2
Posts: 611
Joined: Tue Feb 19, 2008 4:15 pm
Location: White River Jct, Vermont

Fri Feb 29, 2008 1:04 pm

What other purpose would there to be biulding an under water spud gun? Its not much fun unless you could shoot at something underwater and it would be hard to aim at anything unless you your self were under water.

You did bring up a good point with it being loud though I don't think any one of use would have thought of that...
PVC Arsenal 17
Staff Sergeant 3
Staff Sergeant 3
Posts: 1762
Joined: Mon Mar 27, 2006 4:18 pm
Location: United States

Fri Feb 29, 2008 3:41 pm

I suppose simply sealing the barrel off would make more sense. I just thought that a muzzle valve would kill two birds with one stone because it also seals off the barrel.
User avatar
Jared Haehnel
Corporal 2
Corporal 2
Posts: 611
Joined: Tue Feb 19, 2008 4:15 pm
Location: White River Jct, Vermont

Fri Feb 29, 2008 3:51 pm

Makes alot of sense to me and You can biuld it in a way that if it doesn't work you can continue to play with it and at least have a decent spud gun....
Post Reply