well i epoxied my pressure gauge into my cannon yesterday and a few hours later noticed that there was a little sticker on the side saying not for compressed air. is this the same kind of deal like with pvc pipe or do i need to rip it out and get a new one?
and what the heck is lowes doing putting those things beside their air compressors anyways?
dang it... pressure gauge question
Are you sure it didn't say "not for Oxygen or O2"? Big difference from compressed air. I don't think I've ever seen a gauge that said that. And are sure the sticker wasn't related to some PVC part or pipe you purchased? That is commonly stated for PVC.
Also, you shouldn't need to epoxy your gauge in. Get yourself a 1/4" NPT tap and 7/16" drill bit and tap your own threaded holes. Do it in a location where there is a double layer of PVC such as where a coupler has been cemented to the pipe. Use a couple of layers of teflon tape around the gauge threads and you'll be good to go.
Also, you shouldn't need to epoxy your gauge in. Get yourself a 1/4" NPT tap and 7/16" drill bit and tap your own threaded holes. Do it in a location where there is a double layer of PVC such as where a coupler has been cemented to the pipe. Use a couple of layers of teflon tape around the gauge threads and you'll be good to go.
- daxspudder
- Specialist 3
- Posts: 300
- Joined: Thu Apr 24, 2008 10:22 pm
He meant 3/16"starman wrote:Are you sure it didn't say "not for Oxygen or O2"? Big difference from compressed air. I don't think I've ever seen a gauge that said that. And are sure the sticker wasn't related to some PVC part or pipe you purchased? That is commonly stated for PVC.
Also, you shouldn't need to epoxy your gauge in. Get yourself a 1/4" NPT tap and 7/16" drill bit and tap your own threaded holes. Do it in a location where there is a double layer of PVC such as where a coupler has been cemented to the pipe. Use a couple of layers of teflon tape around the gauge threads and you'll be good to go.
"<I>For dare to be peace, I have to keep at it everyday, da Man doesn't take days off so neither can I</I>" -<B>Bob Marley</B>, day before a performance, a day after being shot in the chest. "<I>If you are the big, big tree, we are the small axe, ready to cut you down!</I>" -Bob again :brave:
-
- Private 2
- Posts: 31
- Joined: Mon Jul 21, 2008 1:11 pm
i just used what i had which was a one half inch drill bit and some epoxy. and the warning sticker is on the side of the gauge. what i meant was is the warning about using compressed air their because something could explosively break or it just won't work?.
the warning might have said Oxygen but i can't really remember. i'll have to check it when i get home. in the meantime, and please excuse me for being new at this, why does it matter whether its oxygen or compressed air?
the warning might have said Oxygen but i can't really remember. i'll have to check it when i get home. in the meantime, and please excuse me for being new at this, why does it matter whether its oxygen or compressed air?
- ShowNoMercy
- Sergeant
- Posts: 1094
- Joined: Mon Mar 19, 2007 8:08 am
- Location: Jersey Bitches!
02 tends to be explosive.
Jesus saves, no need to pray
The gates of pearl have turned to gold
It seems you've lost your way
The gates of pearl have turned to gold
It seems you've lost your way
Never seen that before. Just use it up to the highest reading on the gauge you should be fine.
mobile chernobyl wrote:I can shoot a Canuter Valve off my '82 Chevy Ram F150 AT LEAST 3/4 Mile with 'ma cannon made of soup cans duct taped together, then I just squirt some bacardi 151 in the chamber and hold up my cigarrete lighta and WHOOSH! That thing flies at least 3/4 mile
No, I meant 7/16". The starter hole for a 1/4" NPT thread is 7/16".daxspudder wrote:He meant 3/16"
1/2" is too big...thread it properly as I described. As has been said, O2 can be explosive. They make O2 gauges as well.SilentCyan wrote:i just used what i had which was a one half inch drill bit and some epoxy. and the warning sticker is on the side of the gauge.
-
- Private 2
- Posts: 31
- Joined: Mon Jul 21, 2008 1:11 pm
putting it in there isn't the problem as that has already been done. i was just worried that it might not work properly
-
- Sergeant Major
- Posts: 3197
- Joined: Wed Mar 28, 2007 9:48 am
- Location: Greenwood, Indiana
- Has thanked: 5 times
- Been thanked: 15 times
- Contact:
Not really.ShowNoMercy wrote:02 tends to be explosive.
O<sub>2</sub> plus a bit of oil used to lubricate the inside of the gauge can be explosive, especially at high pressures. O<sub>2</sub> plus a bit of residual flammable gas from the last usage of the gauge can be explosive. O<sub>2</sub> itself is not explosive, otherwise O<sub>2</sub> tanks would be regularly exploding.
Gauges and regulators used for O<sub>2</sub> are (1) oil free, (2) never supposed to be used for anything other than O<sub>2</sub> and (3) are pretty well labeled. Usually they will have a thread significantly different (eg. left handed) than do similar parts designed for other gases.
If you look at an oxy-acetylene (or oxy-propane) torch setup it should be impossible to accidentally screw the oxygen regulator onto the acetylene (or propane) tank. You also can't screw the acetylene (or propane) regulator onto the oxygen tank.
Pressure is pressure. If it's a pressure gauge and you are within its specifications, it will work properly.SilentCyan wrote:putting it in there isn't the problem as that has already been done. i was just worried that it might not work properly