So i decided to make an homemade one
(its incredible what we can do with plumbing pieces)
It will be most of the parts in SCH40 PVC and i am currently thinking of an magazine system.
It will shoot Paintballs or marbles.
Upload the picture...
Comments would be apreciated
Posted: Wed Sep 17, 2008 1:06 am
by Tom
Well if you want to shoot some marbles or paintballs you are going to need a very strong spring.
T
Posted: Wed Sep 17, 2008 6:12 am
by Demon
T
??? What mean "T".
And i need to know if this thing could work great.
I'm too lazy to typ my name . But as I looked again at your design, that tube from chamber to barrel is going to kill allot of power. Maybe you should place the chamber at the back of the barrel. But you could also place the end of the chamber at the beginning of the barrel.
Posted: Wed Sep 17, 2008 11:14 am
by al-xg
It could work but probably won't work great.
Well compared to precharged air guns anyway.
Your accuracy might not be too good either, as you'll sway off target with the releaved tension when you let go of the piston.
Why not add a sear and a trigger ? ... well actualy if you were trying to make an airow I can see why you wouldn't
Posted: Wed Sep 17, 2008 5:30 pm
by FishBoy
it might work but it won't be too powerfull, you'ld be better off with a normal pneumatic
Posted: Thu Sep 18, 2008 3:08 pm
by Demon
Keep in mind this will shoot relatively small BB's...
I am currently building it and the piston works very well. Lot of air is pushed out of it.
I upgraded it to an 2 inch piston housing and 1.25 inch piston.
Posted: Thu Sep 18, 2008 3:59 pm
by brplatz
It will shoot Paintballs or marbles.
just small airsoft bb's?
Posted: Thu Sep 18, 2008 5:14 pm
by Demon
Airsoft bb's shotgun rounds...
Posted: Thu Sep 18, 2008 5:42 pm
by sniper hero
anyone an idea for making semi auto kind of this?
nice idea
I'm curious if it will be powerful
. But as I looked again at your design, that tube from chamber to barrel is going to kill allot of power. Maybe you should place the chamber at the back of the barrel. But you could also place the end of the chamber at the beginning of the barrel.
