Oh boy, I think I'm gonna blow my cannon apart!

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
User avatar
jmccalip
Specialist
Specialist
Posts: 118
Joined: Sun Apr 12, 2009 8:07 pm

Fri Apr 17, 2009 9:36 pm

1lb 11oz aluminum piston! :confused2:

That's what I get for being an impulse buyer and not calculating the weight before hand...


I left the grooves like that in the back for a giant spring to use as a bumper. Disregard the horrid finish of the middle of the piston, I was lazy and using a dull insert and not overlapping, ect. That part doesn't matter anyways.



Image
Image
Image

Anyone want to buy it for a steel cannon? lol
User avatar
Gippeto
First Sergeant 3
First Sergeant 3
Venezuela
Posts: 2503
Joined: Sat Jan 19, 2008 10:14 am
Location: Soon to be socialist shit hole.
Has thanked: 2 times
Been thanked: 17 times

Donating Members

Fri Apr 17, 2009 9:48 pm

No thanks.

I like the shape though. :wink:

Welcome to Spudfiles. :)
"It could be that the purpose of your life is to serve as a warning to others" – unknown

Liberalism is a mental disorder, reality is it's cure.
User avatar
c11man
Corporal 3
Corporal 3
Posts: 783
Joined: Fri Feb 06, 2009 4:37 pm
Location: Wisconsin, USA

Fri Apr 17, 2009 9:52 pm

to cut down on the weight you could make it more hollow and reduce the diameter of thecenter section
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Fri Apr 17, 2009 10:27 pm

Weight watchers indeed :roll:

Remember, you don't need you piston to travel more than 1/4 of the barrel diameter for maximum theoretical performance, don't give it space to accelerate too much ;)
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Fri Apr 17, 2009 11:17 pm

c11man wrote:to cut down on the weight you could make it more hollow and reduce the diameter of thecenter section
To cut down on weight I use HDPE. Gippeto used Nylon. The density is less than 1/2 that of Aluminum.
User avatar
jmccalip
Specialist
Specialist
Posts: 118
Joined: Sun Apr 12, 2009 8:07 pm

Sat Apr 18, 2009 12:17 am

So, with one inch of travel, would ya'll think it's safe at say 50PSI? It couldn't gain that much momentum in one inch, could it? I need to find a good bumper in the mean time...

The only thing that worries me is if the tee breaks. All the fittings are glued to that and have a combined cost of $20.
User avatar
rna_duelers
Staff Sergeant 3
Staff Sergeant 3
Posts: 1739
Joined: Mon Sep 26, 2005 7:07 am
Location: G-land Australia

Sat Apr 18, 2009 2:48 am

Well make sure you have a bumper stop that's upto the challenge and I'm calling it a challenge for a reason.

I'm with Technician on this one,get yourself some HDPE and get lathing,half the weight and it's got a very low friction.
Image
User avatar
sniper hero
Specialist 3
Specialist 3
Posts: 332
Joined: Fri Mar 07, 2008 3:12 pm

Sat Apr 18, 2009 3:43 am

WOW
this is like pilot............................................fire :lol:
proud member of dutch spud clan
coming: semi auto pellet sniper:D
User avatar
psycix
Sergeant Major 4
Sergeant Major 4
Posts: 3684
Joined: Mon Jun 25, 2007 7:12 am
Location: The Netherlands

Donating Members

Sat Apr 18, 2009 5:56 pm

You should definitely take off some weight there!
jackssmirkingrevenge wrote:Remember, you don't need you piston to travel more than 1/4 of the barrel diameter for maximum theoretical performance, don't give it space to accelerate too much ;)
Not in a barrel sealer built inside a T and the porting being not very far into the T, especially with a larger seat diameter compared to piston diameter.
Till the day I'm dieing, I'll keep them spuddies flying, 'cause I can!

Spudfiles steam group, join!
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Sat Apr 18, 2009 6:09 pm

psycix wrote:You should definitely take off some weight there!
jackssmirkingrevenge wrote:Remember, you don't need you piston to travel more than 1/4 of the barrel diameter for maximum theoretical performance, don't give it space to accelerate too much ;)
Not in a barrel sealer built inside a T and the porting being not very far into the T, especially with a larger seat diameter compared to piston diameter.
I try to have the piston free to travel that distance at least before hitting the bumper and slowing. I tend to design so the full piston stroke is about 2/3 the valve seat diameter by the time it stops in the bumper and begins the recoil.
User avatar
jmccalip
Specialist
Specialist
Posts: 118
Joined: Sun Apr 12, 2009 8:07 pm

Sun Apr 19, 2009 12:34 am

Ok, I made a bumper out of an 5" 80lb compression spring.


But then I did some calculations and the surface area of the end of the piston is approx 7". This at 50psi equals 350lbs of force. I don't know how the weight of the piston itself affects things...


Will the spring pancake?
User avatar
rcman50166
Corporal 2
Corporal 2
Posts: 697
Joined: Sat Jan 19, 2008 7:11 pm
Location: Bethel, CT
Contact:

Sun Apr 19, 2009 1:10 am

Well I can only calculate it if I know how long 350lbs of force would be acting on the piston, if it is a continuous pressure I can do that now though....350>80 so...yes it would
Image
User avatar
jmccalip
Specialist
Specialist
Posts: 118
Joined: Sun Apr 12, 2009 8:07 pm

Sun Apr 19, 2009 1:44 am

rcman50166 wrote:Well I can only calculate it if I know how long 350lbs of force would be acting on the piston, if it is a continuous pressure I can do that now though....350>80 so...yes it would
Why does time matter. Wouldn't the force still hit a maximum of 350lbs(for example) no matter what, constant or split second?

Here's a pic BTW.

Image
Image
User avatar
Technician1002
Captain
Captain
Posts: 5189
Joined: Sat Apr 04, 2009 11:10 am

Sun Apr 19, 2009 1:59 am

jmccalip wrote:
rcman50166 wrote:Well I can only calculate it if I know how long 350lbs of force would be acting on the piston, if it is a continuous pressure I can do that now though....350>80 so...yes it would
Why does time matter. Wouldn't the force still hit a maximum of 350lbs(for example) no matter what, constant or split second?

Here's a pic BTW.

Image

How long the pressure is present affects the duration of the pulse accellerating the piston. In my t shirt cannon, the recoil is fairly mild unless I launch a full Gaterad bottle, then it leaves bruises.

Nice pics. It would be a good idea to fill the end cap with someting not comperessable. If the bumper materal compresses enough so the piston hits the male plug, it may shatter the female adaptor. I learned this the hard way with my apple cannon. It had a PVC adaptor, but I had to change it after it was shattered once. Stay clear of the breech. Sometimes they do blow out.
User avatar
Carlman
Staff Sergeant 2
Staff Sergeant 2
Posts: 1618
Joined: Sat Nov 24, 2007 1:18 am
Location: Western Australia
Been thanked: 2 times

Sun Apr 19, 2009 3:26 am

isnt that a dwv T?
Image
Aussie spudders unite!!
Post Reply