Pilot valve : Hose Gun
Hello all,
I'm sure people have used these on their guns before, but i just need more information and clarification.
These full metal garden nozzles are easy to find are aren't expensive. I couldn't find any blowgun valves and pressure washers are off the budget, so this was one of the alternatives i could think of. I heard some pneumatics are already using this system backwards.
I thought that it would work the right way but figured that there would be nothing to pressure it close. Would any modifications allow it the right way up?
Probably those that have the trigger on the FRONT would use a system something like MRR's push button pilot? That would work the right way up. Not sure about this.
Cheers,
Froze.
EDIT:
found Snipalux X3, uses a hose gun, what im looking to use :] Just that his isn't a full simple metal one but a sort of heavy-duty looking one.
http://www.spudfiles.com/forums/viewtop ... tml#231531
I'm sure people have used these on their guns before, but i just need more information and clarification.
These full metal garden nozzles are easy to find are aren't expensive. I couldn't find any blowgun valves and pressure washers are off the budget, so this was one of the alternatives i could think of. I heard some pneumatics are already using this system backwards.
I thought that it would work the right way but figured that there would be nothing to pressure it close. Would any modifications allow it the right way up?
Probably those that have the trigger on the FRONT would use a system something like MRR's push button pilot? That would work the right way up. Not sure about this.
Cheers,
Froze.
EDIT:
found Snipalux X3, uses a hose gun, what im looking to use :] Just that his isn't a full simple metal one but a sort of heavy-duty looking one.
http://www.spudfiles.com/forums/viewtop ... tml#231531
I tried one of the plastic ones back in ye-olde 7 years ago.
The valve on those is a poppet valve with the sealing face being held shut by a spring and the rod on the poppet valve pokes out the back to allow you to haul the poppet in, opening the front and letting the water out.
It worked up to aroundabout 100psi - that being the number my pump dial went up to ^^
It cannot be used backwards. I did actually try that but what happens is that after a few tens of psi the spring just gets pushed back by the pressure, opening the valve slightly and allowing air out.
Something that bugged me was how much the lever liked to move the cannon on firing...
The valve on those is a poppet valve with the sealing face being held shut by a spring and the rod on the poppet valve pokes out the back to allow you to haul the poppet in, opening the front and letting the water out.
It worked up to aroundabout 100psi - that being the number my pump dial went up to ^^
It cannot be used backwards. I did actually try that but what happens is that after a few tens of psi the spring just gets pushed back by the pressure, opening the valve slightly and allowing air out.
Something that bugged me was how much the lever liked to move the cannon on firing...
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Yes it was connected at the base.
You can't have the chamber on the other end for the reasons I said. Unless of course you are looking for about 30psi maximum in your chamber.
You can't have the chamber on the other end for the reasons I said. Unless of course you are looking for about 30psi maximum in your chamber.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
The chamber (in this case a coke bottle) connects to where the hose normally connects, while on the other side a BB chamber and barrel are bodged on with copious amounts of epoxyfrozebyte wrote:so thats a simple chamber>pilot>barrel design?
@hotwired
Ok, will try using a sleek plastic/metal hose gun to use as a pilot. is the venting for it good?
@JSR
Yep, what i guessed. Just couldnt think of what that small cylinder was for. BB chamber i see, how many shots could you get out of the bottle? wont a single trigger fire all the air out?(unless you let go really fast)
Cheers
Ok, will try using a sleek plastic/metal hose gun to use as a pilot. is the venting for it good?
@JSR
Yep, what i guessed. Just couldnt think of what that small cylinder was for. BB chamber i see, how many shots could you get out of the bottle? wont a single trigger fire all the air out?(unless you let go really fast)
Cheers
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Read through the thread and your questions should be answered. Note that this was a primitive ghetto desgign born of circumstance, I had made a proper "standalone" BBMG here.frozebyte wrote:BB chamber i see, how many shots could you get out of the bottle? wont a single trigger fire all the air out?(unless you let go really fast)
There says I couldn't bother with compressor pressures though, paintball HPA bottles rule
Alright will read it through. That standalone has a vortex block, too complicated for me to understand
EDIT:
read it through but i still dont understand how you fire the bb's out one at a time, or do you drain them all out at once? (can't watch the video)
EDIT:
read it through but i still dont understand how you fire the bb's out one at a time, or do you drain them all out at once? (can't watch the video)
Do you remember this one?
http://www.spudfiles.com/forums/home-ma ... 15091.html
Spike took them past 10 bar on his youtube videos, as far as I know.
http://www.spudfiles.com/forums/home-ma ... 15091.html
Spike took them past 10 bar on his youtube videos, as far as I know.
Don't confuse models. That is one type which looks like it operates like an air blowgun.
The one originally posted has different internals.
The one originally posted has different internals.
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
As with any BBMG, short pressure on the trigger results in a few BBs at a time being fired. With 2 litres of air at 90 psi I could manage this.frozebyte wrote:read it through but i still dont understand how you fire the bb's out one at a time, or do you drain them all out at once? (can't watch the video)
@MRR
I thought that was a blowgun valve with 'french threads' as stated in comments :]
@hotwired
So thats really a blowgun?
@JSR
I see, so i have this new air blower, and i could just connect it like the way you do and start firing off bbs.
Anyway, back to the point. I couldn't find a hose gun(I think i was at the wrong section, but i found an AIR BLOWER, that seemed something like a pressure washer, but was an air version. Theres no rating, but if its able to hook up to a compressor and start firing away, i think it should be no problem. This plastic one has the same pressure rating as another metal what(but idk the pressure)
Mighty Air blower. Im planning to connect it upside down, wonder if i could use it right side up if im going for only approximately 100psi. Then i would connect it to the back of the tee and it would be much easier to trigger. It jerks when its upside down (top too heavy)
Off topic, but i hope this glue gun doesn't explode on me like the cheap toy-like one did. (BOOM, sparks fly and... hey your glue gun's in flames!)
Cheers
I thought that was a blowgun valve with 'french threads' as stated in comments :]
@hotwired
So thats really a blowgun?
@JSR
I see, so i have this new air blower, and i could just connect it like the way you do and start firing off bbs.
Anyway, back to the point. I couldn't find a hose gun(I think i was at the wrong section, but i found an AIR BLOWER, that seemed something like a pressure washer, but was an air version. Theres no rating, but if its able to hook up to a compressor and start firing away, i think it should be no problem. This plastic one has the same pressure rating as another metal what(but idk the pressure)
Mighty Air blower. Im planning to connect it upside down, wonder if i could use it right side up if im going for only approximately 100psi. Then i would connect it to the back of the tee and it would be much easier to trigger. It jerks when its upside down (top too heavy)
Off topic, but i hope this glue gun doesn't explode on me like the cheap toy-like one did. (BOOM, sparks fly and... hey your glue gun's in flames!)
Cheers
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Your "air blower" is basically what everyone else here calls a blowgun, if it's made for compressor use then I'd wager it's good for at least 150 psi if used the "right" way. You might also want to consider hacking off the nozzle if you want to use it as a pilot valve, in order to increase flow and efficiency.