Well anyway, my co2 fill set-up is a tank adapter to empire regulator to slidecheck/quick connect....
When I bought the regulator I asked the guys at PBcentral what it was set at and they responded 850psi, and I asked how to adjust it and the responded that it was setup for hpa to co2 pressure and that I should just back out the screw slightly to get full unregged co2 pressure, and I was like "ok cool"... 8)
Long story short, I bought a 0-1500 psi gauge the other day, and I find out that all this time I thought I was shooting with unregged co2, I was actually only running about 475psi
!!!! No Wonder the camlok on the minimod was holding up so well!!! because as soon as I found this out I got online at empires website and discovered that this reg is set to regulate from up to 1300psi(on the tank side) down to between 300-850psi on the output side.... Let me tell you this, The difference between 475psi and 700psi is like frikkin nite and day
.... The decimater is now pushing 62gm steel balls at over 1100fps and they punch through the safe like its paper machete 
... And the aforementioned camlock on the mini mod.... Scattered all over the yard 
... I've ordered a stainless camlock for it now... 
Now I've got to remember everywhere I referenced "unregged co2" and correct them... lol
