Page 1 of 1
Types of release valves being used
Posted: Mon Jul 18, 2011 1:13 am
by jsefcik
What type of release valves are you people using on your metal guns?
Ball valves?
Posted: Mon Jul 18, 2011 2:08 am
by MrCrowley
QEV, QDV, piston, ball valve, hammer valve and more.
If you're unsure what those valves are, how they work, how well they perform or how much pressure they can take:
http://www.spudfiles.com/spud_wiki/inde ... =Main_Page
http://www.spudfiles.com/forums/search.html
Posted: Mon Jul 18, 2011 2:21 am
by jackssmirkingrevenge
By release valves do you mean exhaust valves?
Most blowguns are good for around 400 psi, you can consider pressure washer valves for higher pressures as an alternative to ball valves.
Posted: Mon Jul 18, 2011 12:12 pm
by jsefcik
I found out what (quick exhaust valves ) are , but dont know how to build them. Just have to figure out what the rest of them are
@ Jackass, i meant like what do you guys use to release the air from your chamber into your metal guns .
Posted: Mon Jul 18, 2011 12:35 pm
by Gun Freak
His name isn't jackass
Posted: Mon Jul 18, 2011 1:22 pm
by Gippeto
Gun Freak wrote:His name isn't jackass
Maybe the guy was talking to himself?? Seems fitting.
Posted: Mon Jul 18, 2011 1:25 pm
by jsefcik
My fault each time i was looking at it, I was reading jackass sorry dude
jackssi meant like what do you guys use to release the air from your chamber into your metal guns .
Posted: Mon Jul 18, 2011 1:31 pm
by dewey-1
Apparently some one wants JSR to add an "a" in his forum name.
He probably has been called worse but this is rather inappropriate from some real nooby youngster that needs to learn not to double post and also to learn how to search the forum/wiki for information to reduce some of the simplest questions .
Gippetto, I agree 110%.
Posted: Mon Jul 18, 2011 2:42 pm
by Technician1002
Jack is probably one of the best online help guys. He is probably someone you would be better to be friends with.
The chamber is often considered a part of the "gun". The barrel is another part. The vale between the chamber and barrel is what you are really looking for.
The Wiki is a great place to start. Once in Valves you can go further and find a list of valves by their name and type.
http://www.spudfiles.com/spud_wiki/inde ... itle=Valve
See Category:Valves on this page for the list.
Posted: Mon Jul 18, 2011 2:56 pm
by jsefcik
I never said to add an "A in his name.
Posted: Tue Jul 19, 2011 2:02 am
by Crna Legija
Some say.... He lives in a epoxy cave and His blood pressure is measured in bar. All we know is, he's called JSR
Posted: Tue Jul 19, 2011 2:26 am
by jackssmirkingrevenge
dewey-1 wrote:He probably has been called worse