What do you mean "passes through"?saefroch wrote:In that simulation, the trigger passes through the hammer when it recocks.
trigger mecanism for hammer valve
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
The two solid bodies fail to collide, and instead momentarily occupy the same space.
The mechanism should work as drawn, as long as the little pivoting sear on the hammer (that the trigger passes through) has some give in the direction it would move if the missing collision actually took place. I think that trigger design will also function in single-action mode.
The mechanism should work as drawn, as long as the little pivoting sear on the hammer (that the trigger passes through) has some give in the direction it would move if the missing collision actually took place. I think that trigger design will also function in single-action mode.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
The sequence makes perfect sense to me, either I'm missing something or the animation seems to work differently from where you're standingramses wrote:The two solid bodies fail to collide, and instead momentarily occupy the same space.
I've highlighted the key components, where doesn't it work?
- Attachments
-
hectmarr wrote:You have to make many weapons, because this field is long and short life
Between the last and first images, watch closely. The blue trigger must pass through the green part.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Not really, it can be pushed back down - all you'd need to do is change the position of the stop, n'est-ce pas?
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
wyz2285
- First Sergeant 2
- Posts: 2385
- Joined: Sat Mar 06, 2010 7:50 am
- Location: Porto, Portugal
- Has thanked: 1 time
- Been thanked: 3 times
- Contact:
Thx jack for that animation, even through it needs a lot of right springs
currently my gun has a recock+reload action, so only one pull on the bolt will recock the hammer and reload a ammo. It´s doesn´t take much time at all, but I have to remove my eye from the scope
currently my gun has a recock+reload action, so only one pull on the bolt will recock the hammer and reload a ammo. It´s doesn´t take much time at all, but I have to remove my eye from the scope
true, and the green part needs a stronger spring to push it down than the main spring of the hammer i thinkBetween the last and first images, watch closely. The blue trigger must pass through the green part.
When shooting a .22 bolt action from a bench, I don't remove my eye from the scope at all. I can get off a decent shot about once per 2 seconds.wyz2285 wrote:Thx jack for that animation, even through it needs a lot of right springs
currently my gun has a recock+reload action, so only one pull on the bolt will recock the hammer and reload a ammo. It´s doesn´t take much time at all, but I have to remove my eye from the scopetrue, and the green part needs a stronger spring to push it down than the main spring of the hammer i thinkBetween the last and first images, watch closely. The blue trigger must pass through the green part.
POLAND_SPUD wrote:even if there was no link I'd know it's a bot because of female name