Page 3 of 3

Posted: Mon Aug 22, 2011 8:14 pm
by jackssmirkingrevenge
saefroch wrote:In that simulation, the trigger passes through the hammer when it recocks.
What do you mean "passes through"?

Posted: Mon Aug 22, 2011 8:21 pm
by ramses
The two solid bodies fail to collide, and instead momentarily occupy the same space.

The mechanism should work as drawn, as long as the little pivoting sear on the hammer (that the trigger passes through) has some give in the direction it would move if the missing collision actually took place. I think that trigger design will also function in single-action mode.

Posted: Mon Aug 22, 2011 8:34 pm
by jackssmirkingrevenge
ramses wrote:The two solid bodies fail to collide, and instead momentarily occupy the same space.
The sequence makes perfect sense to me, either I'm missing something or the animation seems to work differently from where you're standing :?

I've highlighted the key components, where doesn't it work?

Posted: Tue Aug 23, 2011 12:28 am
by saefroch
Between the last and first images, watch closely. The blue trigger must pass through the green part.

Posted: Tue Aug 23, 2011 12:36 am
by jackssmirkingrevenge
Not really, it can be pushed back down - all you'd need to do is change the position of the stop, n'est-ce pas?

Posted: Tue Aug 23, 2011 7:27 am
by wyz2285
Thx jack for that animation, even through it needs a lot of right springs :?
currently my gun has a recock+reload action, so only one pull on the bolt will recock the hammer and reload a ammo. It´s doesn´t take much time at all, but I have to remove my eye from the scope :roll:
Between the last and first images, watch closely. The blue trigger must pass through the green part.
true, and the green part needs a stronger spring to push it down than the main spring of the hammer i think

Posted: Tue Aug 23, 2011 7:44 am
by ramses
wyz2285 wrote:Thx jack for that animation, even through it needs a lot of right springs :?
currently my gun has a recock+reload action, so only one pull on the bolt will recock the hammer and reload a ammo. It´s doesn´t take much time at all, but I have to remove my eye from the scope :roll:
Between the last and first images, watch closely. The blue trigger must pass through the green part.
true, and the green part needs a stronger spring to push it down than the main spring of the hammer i think
When shooting a .22 bolt action from a bench, I don't remove my eye from the scope at all. I can get off a decent shot about once per 2 seconds.

Posted: Tue Aug 23, 2011 7:52 am
by wyz2285
I´m not so experienced as most of you :roll: