Page 2 of 2
Posted: Tue Oct 25, 2011 6:05 am
by stoj
so we're looking at something like this (see attachment).
thanks for all of your help JSR!
Posted: Tue Oct 25, 2011 6:10 am
by jackssmirkingrevenge
Pretty much, just need to attach a small firing chamber to the QEV.
Edited my previous post
Posted: Tue Oct 25, 2011 6:27 am
by stoj
Posted: Tue Oct 25, 2011 6:46 am
by jackssmirkingrevenge
http://www.ebay.com.au/itm/33-64-M-Fema ... 43aa1ab257
much cheaper and likely 1/2" thread, you can hook it up to the QEV with a reducer
an exhaust pipe
Eh?
Posted: Tue Oct 25, 2011 6:56 am
by stoj
filr
Posted: Tue Oct 25, 2011 7:00 am
by jackssmirkingrevenge
Looks good - one thing though, if you want a ball valve as a reloading mechanism, it either needs to be drilled or of the three way type like this:
Posted: Tue Oct 25, 2011 7:05 am
by stoj
I suppose if i do it that way, I don't have to go about converting the metal to PVC... (FYI I was going to drill the two way
) ...and use metal for the barrel instead.
Just comes down to whatever is cheapest I suppose!
EDIT: How far would a marshmellow go operating on 80-125psi?