Page 1 of 1

High pressure test-bed

Posted: Sun Jan 22, 2012 12:22 am
by Lockednloaded
I dismantled my detent gun some time ago, and my pressure washer handle has been gathering som dust recently, so I decided I'd use some spare parts to try some constant air source projects with it (i.e. full auto, semi auto, valveless, etc...) so I mocked up the base for many projects to come

Image

I've hooked it up to a little BBMG and I've been very satisfied with the results, but hopefully there'll be more to come

Posted: Sun Jan 22, 2012 12:43 am
by jrrdw
So what pressures are you using?

Posted: Sun Jan 22, 2012 12:47 am
by Lockednloaded
jrrdw wrote:So what pressures are you using?
850psi straight out of the HPA tank

Posted: Sun Jan 22, 2012 1:05 am
by jrrdw
Sweet! Does it last long?

Posted: Sun Jan 22, 2012 1:34 pm
by Brian the brain
We're gonna need a vid of that bbmg in action you know... :D

Posted: Sun Jan 22, 2012 1:54 pm
by Lockednloaded
Of course! I'm probably going to try to rig up a pulsed air system for the BBMG so pressure can build up more. If not I'll try to hook up a detent for more power

Posted: Tue Jan 24, 2012 7:26 pm
by Lockednloaded
Different setup, with attached BBMG
Image

Posted: Wed Jan 25, 2012 12:58 am
by jackssmirkingrevenge
Reminds me of what I did with this one, didn't see much use as I started fiddling with hybrids shortly after, ah well.

I love the inline configuration, let's see that HPA BBMG working ;)

Posted: Wed Jan 25, 2012 2:04 am
by Petitlu
Euh ...
870psi in PVC! :shock: