Rotation mechanism Revolver pneumatic

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Brain11
Private
Private
Posts: 3
Joined: Mon Jun 19, 2017 10:00 am

Mon Jun 19, 2017 11:35 am

Hello from Germany!

My name is Thomas and i was reading already a while in the forum an the database and found some great ideas!!!

But for my own Project i have a Interesting question:

I want to build a fully pneumatic air cannon and one of my biggest problems is the revolver mechanism...

So maybe you can give me some tips how to move / rotate and lock the revolver drum in the right position only with one or more pneumatic cylinders

At the attached pics you cam see the actual construction...

I hope someone has a good idea!

Much greetings from germany
Thomas
Attachments
IMG_2507.JPG
IMG_2508.JPG
IMG_2509.JPG
User avatar
matti
Specialist 2
Specialist 2
Finland
Posts: 252
Joined: Tue Oct 04, 2005 1:01 pm
Has thanked: 1 time

Tue Jun 20, 2017 6:25 am

Welcome!

Solar here build a launcher called Eclipse, search it with the forum search and you will find lot of information about similar system.
http://eclipsedefense.com/products.html
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Wed Jun 21, 2017 5:52 am

Interesting project!

With regards to locking the drum in place for firing, the Crosman 38 might be of some inspiration:

Image

Part BB022 is pushed by spring CS686 and acts as a detent, partially entering the cylinder opening and temporarily locking it in place.

here's a conceptual integration with an air ram:

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
Brain11
Private
Private
Posts: 3
Joined: Mon Jun 19, 2017 10:00 am

Wed Jun 21, 2017 2:33 pm

Hey guys,
Thank you for the answers!

The eclipse project lead me to the mauser zig zag mechanism, which is a good possible solution i think...

The Second idea also Sounds good... hm we will see

Has someone furthermore ideas?

Have a nice day
Thomas
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 319 times

Donating Members

Thu Jun 22, 2017 10:13 am

You could also have the magazine preloaded by a spring and indexed by an escapement:

Image

This is how many rotary magazines on air rifles work, like this Daystate:

Image
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
sharpshooter
Private 4
Private 4
Posts: 75
Joined: Wed Feb 08, 2006 6:49 pm

Thu Jun 22, 2017 4:21 pm

Are you dead set on pnuematics? You could set an Arduino to rotate a stepper or servo X number of degrees Y number of milliseconds after firing. Would only be a few more steps to make it continuous fire after that...
Brain11
Private
Private
Posts: 3
Joined: Mon Jun 19, 2017 10:00 am

Fri Jun 23, 2017 12:10 pm

Hey sharpshooter,

Yes, i only want pneumatic because i want a System that is fit for Action anytime also in a emergency situation...
With Electronic everything would be easier as you described, with a Stepper Motor and so on...
But you Need a power supply and so on, so i think there Are more possible errors in such a System...

Nice greetings from Germany
Thomas
User avatar
Solar
Corporal
Corporal
United States of America
Posts: 545
Joined: Tue May 17, 2005 11:53 pm
Has thanked: 1 time
Been thanked: 17 times

Sat Dec 09, 2017 10:54 pm

The mauser style cam is a very good and reliable way of doing it. You need to make sure than the spring loaded pin does not have a lot of play and that the carrier for it is also with minimal play. The reason for us going from a 2" cam to a 6" cam around the entire cylinder was based on the problem of having the play accentuated the further out from center the cam was being locked in place. If you have access to a 4th axis mill you can get away with hogging out the cam in a single pass with some simple G code but a more precise(and proper) way is with a smaller end mill making more detailed cuts. That being said, my first CNC cam was done on a MAXNC with a 1/4" cut by a 1/4" end mill which is out of the manufacturers spec for the machine but it was able to handle cutting 50 before the machine needed a refurb.

Using a motor with an encoder is another way but requires an absolute encoder on the final output shaft if you are using a gear motor.

I do plan on revisiting the mauser style system as it works very well in pure pneumatic systems and by linking the extension down the straight groove in the cam to the firing piston (using a small diameter piston) It does not require blowback forces to index the cylinder. Using too large of a indexing piston will effect the speed of the firing mechanism so we used very small bore cylinders. It was not that way with the first gen that instead of a single 6" piston we used two 1.5" throw pistons that were 3/4" bore size. Using a single piston pushing a carrier down the center of two rod guides worked the best and we overcame the limitations of the small bore sized cylinders weak spring by adding two springs to the inside of each rod.
Post Reply