Page 1 of 1

paintball gun dimensions (Tippmann SL-68 II)

Unread postPosted: Sat Jun 08, 2019 7:18 am
Author: markdem
I have taken measurements of a Tippmann SL-68 II paintball gun internals, mostly for my own record keeping but others may want to take advantage of this data. I couldnt be bothered taking measurements of the bolt-catch or trigger - tough tacky, figure it out from the pictures. Adjustments may be required, but the measurements are pretty close.

All measurements are in millimeters. Based on the Nelson valve.

sl-68 measurements - Copy.png
metric dimensions

20190224_142724.jpg
internals group view 1

20190224_142729.jpg
internals group view 2

20190224_142742.jpg
internals group view 3

20190224_142757.jpg
internals group view 4

20190224_142812.jpg
cutout in bolt to prevent paintball chops

20190224_142812.jpg
cutout in bolt to prevent paintball chops

20190224_142826.jpg
inside the hammer

20190224_142853.jpg
inside the bolt

20190224_142905.jpg
trying to show that the bolt is made of 2 pieces, very tightly fitted

20190224_142924.jpg
valve closed

20190224_142934.jpg
valve open view 1

20190224_142942.jpg
valve open view 2

20190224_142954.jpg
valve open view 3

20190224_143011.jpg
inside body

20190224_143043.jpg
back side of body. valve housing area

20190224_143134.jpg
overall view of body and components 1

20190224_143148.jpg
overall view of body and components 2

20190224_143159.jpg
overall view of body and components 3

20190224_143209.jpg
overall view of body and components 4

20190224_143219.jpg
overall view of body and components 5

20190224_143327.jpg
view from back of body with valve installed

20190224_143334.jpg
view from front of body with valve installed

20190224_143423.jpg
longer spring is for the hammer. shorter spring is for the valve

20190224_143430.jpg
same springs, different view

Re: paintball gun dimensions (Tippmann SL-68 II)

Unread postPosted: Wed Jun 12, 2019 5:42 am
Author: jackssmirkingrevenge
Thanks for sharing!