pnumatic spud guns

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
quinn whitsitt
Specialist 2
Specialist 2
United States of America
Posts: 234
Joined: Fri Feb 09, 2024 1:58 pm
Location: central city arkansas
Has thanked: 55 times
Been thanked: 7 times
Contact:

Fri Feb 09, 2024 2:15 pm

hello every one hope you have a good day but i have an idea to help you all i am think about using a 100 cu feet pcp tank at 5000 psi drilling a hole at the back end with a one way valve facing toward it and changing the front valve to be on way valve that is qev and hook it up to several pipes to get it to go up to the top then put a tee once you reach a good stock and accelration also but a qev valve behind sed tee and at the other end of the tee is the barrel at the end of the barrel put a tee with the one way valve on the front of the tee to face backwards so the air dose not escape put another one way valve that face down and then make an attachment from the one way valve at the bootom of the tee go down into the tank i do not know how just figure it out also put a valve one way valve that faces forward in front of the barrel that way the air stays in there
edits also please weld a ball valve to the pcp tank and drill a small hole in the tank this is so air can go into the tank for reafels or exit the tank if you open the valve you all are great and i hope you all have a great day if there is anything i can do fore you please commit or if you want to add any suggestions also put it in the comment box and have a great day