Page 1 of 2

puestin of co2

Posted: Sat Nov 04, 2006 8:43 pm
by GOLDLOKS76
im new and i need to make and paintball gun im stuck on how to control the co2 from all flowing out. plz help im a retard!! this part ex: >[co2]

Posted: Sat Nov 04, 2006 9:28 pm
by MrCrowley
read the title of the forum index first - "how-to database(NOT FOR HELP-ME POSTS)

and for your question your gonna need to regulate the pressure with a regulator believe it or not.

Posted: Sat Nov 04, 2006 9:33 pm
by GOLDLOKS76
i no that part but i would like to make 1 i dont no how to do that so ya. but i did look for some and they were like $80 so im broke and i dont have a job so plz help and dont b an ass\

Posted: Sat Nov 04, 2006 9:41 pm
by ProfessorAmadeus
Are you planning on using it to shoot someone? If so just forget about it.

Now that you wont shoot someone you use a Valve to hold the pressure in.

Posted: Sat Nov 04, 2006 10:33 pm
by GOLDLOKS76
how do i hold the pressure in

Posted: Sat Nov 04, 2006 10:35 pm
by ProfessorAmadeus
A valve..... .

Posted: Sat Nov 04, 2006 10:37 pm
by GOLDLOKS76
yes the presher thing that tells me how much prsher is in the tank or somthing

Posted: Sat Nov 04, 2006 10:45 pm
by MisterSteve124
you need a regulator.

Posted: Sat Nov 04, 2006 10:54 pm
by PCGUY
Listen to what people tell ya and don't post in the wrong section. This is your only warning.

Posted: Sat Nov 04, 2006 11:03 pm
by ProfessorAmadeus
Ok dont build this. Your not smart enough.

Posted: Sun Nov 05, 2006 2:12 am
by singularity
you use a gauge to tell you how much pressure there is and you use a regulator to limit the flow/pressure and you use a valve to hold the pressure until you want to fire it. dee dee dee

Posted: Sun Nov 05, 2006 4:17 pm
by THEMOST
you would be too stupid to use co2 unregulated. I'm going to try a way to use it with pvc un regulate, but im not telling you and theres no piont because you wouldnt understand. you need to purchase a regulator or dont use co2, especially with pvc. use metal for co2. I suggest using a sprinkler valve for the valve on a pb gun.

Posted: Sun Nov 05, 2006 4:25 pm
by GOLDLOKS76
ok im willing to use a valve but i wont to go paintballing with it. and i would like it to look like a pb gun 2 so if you can plz send piks

Posted: Sun Nov 05, 2006 5:01 pm
by THEMOST
it's really simple. Attatch a 1/2" schedual 80 pvc pipe to one end of a valve then attach an air chamber to the other end that has a tire valve in it so u can pump it up with a bikepump or an air compressor.

Here is a link of a really simple cannon that is very similiar to what you want:
http://www.spudfiles.com/forums/viewtopic.php?t=2247&

unless youve got a regulator it wont look like a conventional pb gun.

Posted: Sun Nov 05, 2006 9:54 pm
by MrCrowley
sprinkler valves arn't recomended for use with co2