Recently my QEV arrived in the mail (courtesy of Mr.Plow) and I got right to building. I had bought all the parts beforehand so I could finish it the day I got it.
The barell is 48 inches of ½ pipe and the chamber is 36 inches of 1 inch pipe. I have also a dual chamber made of 2 sections of 1 inch pipe, each being 24 inches in length. It is exhausted by a ¼ inch high-flow blowgun and is filled by a ¼ inch ball valve. It's pretty fast shooting to, I can get off 20-30 shots a minute.
Pics can be found at http://coppercannon.mypicgallery.com/ .
The QEV is a ¼ ported Schrader Bellows QEV.
Copper QEV
-
drac
- Corporal 4
- Posts: 899
- Joined: Sun Apr 24, 2005 8:56 am
- Location: Avon, NY
- Been thanked: 2 times
That's what I did, it got about 12 replies there. I like for everyone to see my creations. 
Not to sound like an ass or anything, but the proper term is soldering, although I bet you could weld copper.
Not to sound like an ass or anything, but the proper term is soldering, although I bet you could weld copper.
