Need help

Show us your pneumatic spud gun! Discuss pneumatic (compressed gas) powered potato guns and related accessories. Valve types, actuation, pipe, materials, fittings, compressors, safety, gas choices, and more.
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 9:02 pm

I need to make a simple, semi automatic pneumatic t-shirt launcher. Not something too complicated 'cause I have a budget, just not exactly sure on how much. I want it to be able to shoot off maybe 5 (is that a high amount?) or more t-shirts on a single fill up. I have an air compressor, so if we could figure a way on how to use that instead of having to buy something special that'd be great.


-
Jello Mold
User avatar
An Apple Pie
Private
Private
Posts: 10
Joined: Tue Oct 03, 2006 5:38 pm

Wed Apr 11, 2007 9:11 pm

How far do you need to shoot them? How big is your compressor, and how big is your budget (yes I know that you said you don't know but it would be very helpful to know)?

The hardest part would be finding a way to shoot soft irregularly shaped objects, like t-shirts semi-automaticaly. It would be easier to build and cheaper if you just went for a bolt type loading mechanism instead. Beyond that I do not know without more details.

Good luck!
PAspuder
Private 3
Private 3
Posts: 53
Joined: Fri Apr 06, 2007 8:40 pm

Wed Apr 11, 2007 9:18 pm

what material did you have in mind....i guess that depends on the budget?
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 9:19 pm

I would assume about 500 to 600 dollars.

and maybe 100 to 200 feet, but can't you change the psi to what you need it for distance? If I can get a semi automatic pneumatic cannon blueprints, with a barrel of about 2.5" then I'll mess around with the psi.
goathunter
Corporal 2
Corporal 2
Posts: 675
Joined: Thu Feb 15, 2007 9:20 pm

Wed Apr 11, 2007 9:24 pm

unfortunetly your not going find plans for a semi.Try this style with preloaded catridges.May require a little imagination on your part to adapt it.
http://www.pukindogspaintball.com/cannons/BECC2.htm
User avatar
TwitchTheAussie
Corporal 5
Corporal 5
Posts: 980
Joined: Tue Feb 06, 2007 3:23 am

Wed Apr 11, 2007 9:27 pm

Try and find a way to make it like a nerf gun. Where you put the into the line holder and just move it up.
Raise your horns if you love metal.
spudgunning is like sex, once you've tasted, you can't wait til next time.
-
CpTn_lAw
keep_it_real
Specialist 3
Specialist 3
Posts: 320
Joined: Sat Dec 23, 2006 4:41 pm
Location: Bend, Oregon

Wed Apr 11, 2007 9:29 pm

would assume about 500 to 600 dollars.
OUch!
You could build a good one for probably around $70 to $120. 5 tshirts seems like a lot. I would make a breech loader with a piston valve (or sprinkler valve or qev) which can be filled and actuated by a sleeve valve. That would be the easiest way to make a semi auto.[/quote]
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 9:34 pm

well, any pre made how to's, or parts lists, or anything? I really hate to just wing it on this. It HAS to be semi auto.
keep_it_real
Specialist 3
Specialist 3
Posts: 320
Joined: Sat Dec 23, 2006 4:41 pm
Location: Bend, Oregon

Wed Apr 11, 2007 9:46 pm

It's really not all that tricky. I'm pretty sure I winged every design I've made. Just go to a plumbing shop, make sure there's a wide open space beneath all the pvc fittings and just lay them all out. If you still don't feel like it, post something, and i'll make a how to.
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 9:48 pm

Yes, please make a how to. But remember, it HAS to be semi automatic, with at least 5 shirts off of one fill.
keep_it_real
Specialist 3
Specialist 3
Posts: 320
Joined: Sat Dec 23, 2006 4:41 pm
Location: Bend, Oregon

Wed Apr 11, 2007 9:50 pm

K wait. You're going to have to muzzle load 5 tshirts down the barrel. Is that OK? and about how big are the tshirts in diameter
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

Wed Apr 11, 2007 9:53 pm

on the barrel, you could have a tee with a piece of pipe running out ( verticly) and have that filled with tee-shirts. the shirts would have to be in abag or tightly wraped. you could have a piston push them down with a spring and use a QEV for firing. 3/4 inch would easly get you the range you want. If you want it to be porable, make th chamber out of 6'' pipe and have it be a couple feet long and carry he tank on your back.
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 9:54 pm

No, I have no problem putting one in it, then shooting, then stuffing another down it. I'd say they're about 2 to 2.5" in diameter, but a tight fit is good.
keep_it_real
Specialist 3
Specialist 3
Posts: 320
Joined: Sat Dec 23, 2006 4:41 pm
Location: Bend, Oregon

Wed Apr 11, 2007 9:58 pm

can you carry the air compressor out to where your shooting or can you only take the gun?
Jello Mold
Private 3
Private 3
Posts: 47
Joined: Wed Apr 11, 2007 8:29 pm

Wed Apr 11, 2007 10:00 pm

I can take the air compressor, I'll probably have one at where it's going to be fired. This is all for my church, they wanted me to make one for their teen program, so I said ok, they gave me a max of 600 dollars, if anything's left I can get a decent air compressor and keep it there.

it needs to have a psi gauge, so I don't blow up the chamber. and hopefully a way I can change how much psi is used per shot, so I can adjust how far it goes.
Last edited by Jello Mold on Wed Apr 11, 2007 10:05 pm, edited 1 time in total.
Post Reply