How do I fit a schrader valve to a Plastic bottle
-
- Private
- Posts: 4
- Joined: Sat Apr 14, 2007 3:28 am
Bassically I'm new to these forums (first post : )
I have made a cannon out of 15mm pvc connected directly to a ball valve with a 15 to 22 converter which fits quite snugly on the inside of the 500ml drinks bottle. I can fit everything together perfectly air tight except for the schrader valve (which i cut from my dad's bike's inner tube 8). I have tried gluing it with super glue and pvc glue and it doesen't work.
I would really appriacate it if someone could share with me any tricks on how to fix it or where i can get specail easy fit valves.
In advance thankyou (sorry for spelling 14 year old dyslecsic)
I have made a cannon out of 15mm pvc connected directly to a ball valve with a 15 to 22 converter which fits quite snugly on the inside of the 500ml drinks bottle. I can fit everything together perfectly air tight except for the schrader valve (which i cut from my dad's bike's inner tube 8). I have tried gluing it with super glue and pvc glue and it doesen't work.
I would really appriacate it if someone could share with me any tricks on how to fix it or where i can get specail easy fit valves.
In advance thankyou (sorry for spelling 14 year old dyslecsic)
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Hi and welcome to the forum.
Have you tried this stuff?
works great for me
Have you tried this stuff?
works great for me
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private
- Posts: 4
- Joined: Sat Apr 14, 2007 3:28 am
no but have with similar products do you have any pictures of how you did it?
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
First you need to reduce the schrader to bare metal at the base (ie remove the rubber coating along the body), I find that an easy way of doing this is simple scraping off the rubber with a good blade then finish it off with rough sandpaper.
You should be left with something like the one illustrated in the pic attached.
Now all you need a 6mm hole in the base of the bottle you're using as a chamber and stick the schrader in with plenty of araldite, leaving it to set overnight. Be careful not to get any inside the bottom of the schrader as it may gum up the internal mechansim.
You should be left with something like the one illustrated in the pic attached.
Now all you need a 6mm hole in the base of the bottle you're using as a chamber and stick the schrader in with plenty of araldite, leaving it to set overnight. Be careful not to get any inside the bottom of the schrader as it may gum up the internal mechansim.
- Attachments
-
- Dscf0005.jpg (4.76 KiB) Viewed 4561 times
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
- Private
- Posts: 4
- Joined: Sat Apr 14, 2007 3:28 am
cheers mate will have to try have you got any pictures of a cannon you've made in this fashion?
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
-
- Private
- Posts: 4
- Joined: Sat Apr 14, 2007 3:28 am
thankyou so much i will go and buy some aldrite do they sell it in the uk?
- jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
I would think so, it's a fairly common brand. If you don't find it any 5 minute epoxy will do really, this is just the brand i've got the best results from.
hectmarr wrote:You have to make many weapons, because this field is long and short life
i used J B weld on my last shrader attatchment an it didnt work as well as you would think i had to keep adding it..maybe i did some thing wrong
"Those who are different change the world. Those who are the same keep it that way"
- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
Sam you're attatching it directly to the soda bottle right?
If so that may be why it leaks.
try putting your schrader in a tee with a pvc cap on the down end.
just drill a hole in the pvc cap and jam the schrader through. Then prime and cement it on.
If so that may be why it leaks.
try putting your schrader in a tee with a pvc cap on the down end.
just drill a hole in the pvc cap and jam the schrader through. Then prime and cement it on.
:pottytrain3:
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:14 pm, edited 1 time in total.
- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
aren't soda bottles and scraders made of plastic so couldn't you just melt em together with a lighter. Although this seems very inpractical.
:pottytrain3:
-
- First Sergeant 3
- Posts: 2400
- Joined: Wed Oct 18, 2006 11:12 pm
- Has thanked: 2 times
- Been thanked: 10 times
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 3:14 pm, edited 1 time in total.