Page 1 of 3

gun for sister

Posted: Tue Apr 24, 2007 3:43 pm
by pyromaniac
My sister saw the myth busters episode where they used a cannon to shoot four tennis balls with a net( to catch (pidgons)(sp?). So now she wants me to make one for her she'll pay for it so it'll give me some fun.

heres some designs i made on ms paint.

I know they wont go to far with 4 barrels but im hopeing for atleast 100 feet.

i don't want to make a piston so im either going to use 2 1 inch modded sprinklers or a 2 inch toro.

A little picture
the blue circle inside the red circles is the chamber for the second gun.
<a href="http://photobucket.com" target="_blank"><img src="http://i163.photobucket.com/albums/t310 ... design.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>

Posted: Tue Apr 24, 2007 3:47 pm
by ShowNoMercy
What? Does that diagram make any sense at all or is it just me? Do the valve(s) trigger all the barrels at once? Is it an o/u setup or does the drawing distort it?

Posted: Tue Apr 24, 2007 3:54 pm
by pyromaniac
the valve fire's all four tennis balls at once.

Posted: Tue Apr 24, 2007 3:55 pm
by ShowNoMercy
That makes a bit more sense now, so whats the point of having four barrels?

Posted: Tue Apr 24, 2007 3:57 pm
by pyromaniac
do you read? she wants it to shoot 4 tennis balls all conected to one net. its more of a net shoots tan tennis balls.

Posted: Tue Apr 24, 2007 4:13 pm
by super spuder
make sure that the barrels are pointing out a bit or else the net will not expand, what a nice brother you are :lol: have fun making that thing, and make sure you post it when it is completed :wink:

Posted: Tue Apr 24, 2007 4:16 pm
by pyromaniac
I will but i don't know how to move the barrels out. A 45 would be to much and theres no like 20 degree one.

post on the poll.

Posted: Tue Apr 24, 2007 4:24 pm
by wannabie
nice idea how big is your sister because if yuo make the over shoulder one might be a bit hard for her to use

Posted: Tue Apr 24, 2007 4:32 pm
by pyromaniac
Shes 14 it will be fine for her with both.

Posted: Tue Apr 24, 2007 4:50 pm
by iknowmy3tables
what kind of connection will you have for the 4 barrel to get equal flow, this reminds me of an American civil war experimental canon with 2 barrels that had a chain between the 2 cannon balls, it was build to horizontally mow the marching enemy, there was a lot of problems with it, mainly it was the timing of the canon balls, this caused erratic flight and the chain to rip and the balls flying in random directions, I believe a few people we killed from test including a lot of grass, and a cow
you could learn a lesson or 2 from that story to help you on your cannon

Posted: Tue Apr 24, 2007 4:54 pm
by pyromaniac
well to get a equalish flow to all four barrels i will have a tee with a tee in both sides then 90s on all of the tees opening leading to the barrel.

this cannon isn't meant for really doing damage just for fun.

Posted: Tue Apr 24, 2007 5:12 pm
by wannabie
well good luck on the cannon i dont think you should have much of a problem if all 4 barrels are the same distance from the chamber then the air should get there at the same time :P

Posted: Tue Apr 24, 2007 5:14 pm
by pyromaniac
The sooner i can get started on thsi the better because she changes her mind on things alot.

Posted: Tue Apr 24, 2007 6:32 pm
by scatdawg
dont forget to add in a 10 percent builders fee to help fund your next cannon.

Posted: Tue Apr 24, 2007 7:42 pm
by pyromaniac
nah ill get to use it too its like a cannon for my sister and I. I'll probable use it more than her.