Page 1 of 1
what to build?
Posted: Wed Apr 25, 2007 5:19 pm
by spudthug
ok well i have a ass load of copepr parts and a bunch of blowguns/other things and iron parts to make shat with...its going to be a piston gun but i would like to get ur guys opinions on the following
btw it will be all copper
1. handheld or stationary
2. design of chamber
3. design of behind barrel
4. pilot design
Posted: Wed Apr 25, 2007 5:20 pm
by ShowNoMercy
How about a multi barreled gun that has a single chamber and valve with a big manifold to attach barrels to?
Posted: Wed Apr 25, 2007 5:30 pm
by spudthug
hmmm sounds....bulky...i dont plan on ever making a multi barreled copepr gun..they would be so mis algined afeter a week of me...copepr pends easily and i owuld proabbly be using .5 barrels...
oh and btw my psiton is going to be 1 inch with 3/4 opening
Posted: Wed Apr 25, 2007 5:34 pm
by ShowNoMercy
How about an actual decent looking sniper rifle? With a real wooden stock and etc?
Posted: Wed Apr 25, 2007 5:36 pm
by spudthug
hmm...how would i build a barrel sealing piston into that??
Posted: Wed Apr 25, 2007 5:40 pm
by ShowNoMercy
well can you make it look like an M14 with the chamber on your gun being analogous to the gas piston on the M14?
Posted: Wed Apr 25, 2007 5:44 pm
by spudthug
idk maybe..the problem is getting a stock...
i was tihnking maybe a 1 inch piston going down to a double 1 inch chamber and porting with a 1/4 inch bv and making it stationary..but thats been done alot and my comp gun is like that....hehe it will be posted tomorrow or friday it is effing loud, powerful, enourmous, shoots a frigging 50 gram slug at 500+fps and a 10 gram marble at 1054 fps...and thats at 100 psi...wait till i get my 250 psi pump
Posted: Wed Apr 25, 2007 6:09 pm
by AmYisroelChai
A double chamber makes it bulky. how about a longer chamber slightly larger? Keep it sniper looking.
Have fun!
BTW
I have access to bunch of copper pipe and fiitng and I want to build a Sniper with it. What does your barrel sealing piston look like? If you dont mind sharing a pic or description would be nice.
Thanks
Posted: Wed Apr 25, 2007 7:03 pm
by spudthug
ull see it on my comp gun..well the outside.. inside is a teflon machined piston fitting almost perfectly with 2 equilization grooves that are 1/32" and 2 sheets of neoprene bolted to the front and the back with a grinded put bushing so the barrel slides halfway through
Posted: Wed Apr 25, 2007 7:12 pm
by Thursto
Well, if it was me, i would go with han helf, because i think portable cannons are great, because your not restricted, to sertain aras, good luck man!