piston problem
- pyromaniac
- Corporal 4
- Posts: 805
- Joined: Tue Feb 27, 2007 7:18 pm
- Location: MO
did you do what i told you to do?
make a sealing face on the back of it so when the piston slides back it seals on the porting and then all of the air will rush out of the barrel not the pilot.
or just squeeze your pilot really fast if you have a blowgun.
make a sealing face on the back of it so when the piston slides back it seals on the porting and then all of the air will rush out of the barrel not the pilot.
or just squeeze your pilot really fast if you have a blowgun.
:pottytrain3:
- origin unknown
- Corporal
- Posts: 533
- Joined: Sat Apr 14, 2007 2:38 pm
- Location: Searcy, Arkansas (college) and Memphis, TN (hometown)
The same thing happened to me on my gun, and i didn't know what it was. I think is was cause I didn't have a big enough air chamber.
im babysitting so i cant try right now. good ider thopyromaniac wrote:did you do what i told you to do?
make a sealing face on the back of it so when the piston slides back it seals on the porting and then all of the air will rush out of the barrel not the pilot.
or just squeeze your pilot really fast if you have a blowgun.
-
- Specialist
- Posts: 117
- Joined: Thu Mar 29, 2007 10:50 am
Are you trying to port using only a Husky blow gun? Hmmm... let me know how that works for you. I ws going to do that but I was discauredged from doing so because it would not port fast enough even for a 2" piston. The feedback I got was to use a 3/8 or 1/2" Ball valve.
EDIT: Mopherdude do have access to anyone who can lathe a groove or 2 for you? Put in a O-ring that will also help if you can do it.
Does that realy work? You put your hand there and no air comes out?pyromaniac wrote:did you do what i told you to do?
make a sealing face on the back of it so when the piston slides back it seals on the porting and then all of the air will rush out of the barrel not the pilot.
or just squeeze your pilot really fast if you have a blowgun.
EDIT: Mopherdude do have access to anyone who can lathe a groove or 2 for you? Put in a O-ring that will also help if you can do it.
- turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
ive had the same probloms, etheir you have to small a chainber or you blo gun dosnt acuate quick enough
try using a modified sprinkler valve for your pilot
wait does your piston slide back at all, if not use some vaseline as lube
try using a modified sprinkler valve for your pilot
wait does your piston slide back at all, if not use some vaseline as lube
i have had your problems also,
o-rings would be ideal.
i have found that caster oil works wonders
or simply do as pyromaniac said and
o-rings would be ideal.
i have found that caster oil works wonders
or simply do as pyromaniac said and
make a sealing face on the back of it so when the piston
- turbohacker
- Specialist 3
- Posts: 392
- Joined: Wed Dec 20, 2006 12:34 am
i think vaseline will eat at rubber but not pvc, wait, what is your piston made of?
i dont think yo have air let out quick enough so do what i did for my 2" piston go though your dads plmbing stuff and find a 3/4" ball valve and nipple (ha)... ok this might not work perfectly but you do need a bigger pilot
"Those who are different change the world. Those who are the same keep it that way"
- spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
lol why woudl; vaseline eat at pistons..no it doesnt..can u move ur piston with your motuh..if not thats your problem and obviously u cant port a piston with a blowgun...chaos is an exception because hes jsut cool like that...
now im not saying its impossible to port a psiton with a blowgun but u have to have access to more than ghetto parts...chaoses is perfect
now im not saying its impossible to port a psiton with a blowgun but u have to have access to more than ghetto parts...chaoses is perfect
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
- spudthug
- Corporal 5
- Posts: 936
- Joined: Mon Feb 26, 2007 9:02 pm
- Location: johnsonburg, Pa USA
- Contact:
dude that still wont work...use a ball valve before anything..just hook up a 1/4 ball valve...it will work if u can move the piston with your mouth..i keepo telling everyone that is having problems to do this yet they wont listen...
4" piston valved cannon-half done..( i spilt my cement...)
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..
Hybrid- 75% done. need to build propane holder and drill/tap sparkplug hole..