Page 1 of 1
bmf damage video link
Posted: Sat Apr 28, 2007 10:34 pm
by scatdawg
Posted: Sat Apr 28, 2007 10:40 pm
by zeigs spud
:pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2: :pottytrain2:
yea 100 psi and no offence but that sucked, you need a quicker release of the air and a bigger pressure chamber.
looked kool tho _^
Posted: Sat Apr 28, 2007 10:43 pm
by scatdawg
that rpg weighs over two pounds. so i thought that was impressive for a cannon this size. i linked more videos of some smaller projectices and the damage is alittle more impressive.
the carriage bolts penetrated clear thru 2 sheets of 1/2 inch plywood back to back from about 10 yards at 100 psi. we froze some paintballs and they broke out the glass quite nicely. the aluminum bullets did some nice damage to the doors, but you can tell that they were tumbling by the damage. i'm going to drill a hole in the backs of the bullets to make them nose heavy so that they will track like a real bullet and allow the rifling to work hopefully.
Posted: Sat Apr 28, 2007 10:46 pm
by zeigs spud
ohh see! it is bad a$$ in the other vids lol. shouldn't of posted firstone >.<
niiiiiice lol
Posted: Sat Apr 28, 2007 10:52 pm
by scatdawg
hey thanks. i just wanted to show that it could launch an extremely heavy projectile. and it had a diameter of .750 in a .800 bored barrel. so a lot of air escaped around it.
i should have posted it last tho.
Posted: Sat Apr 28, 2007 10:54 pm
by zeigs spud
lol np. get an ammo that isn't rpg simulating and fits right into the barrel and it will kick so much butt ^_^
Posted: Sat Apr 28, 2007 11:15 pm
by scatdawg
added more videos. will add even more in the morning