Marble inaccuracy
- VH_man
- Staff Sergeant 4
- Posts: 1827
- Joined: Sat Dec 09, 2006 6:00 pm
- Location: New Hampshire
- Been thanked: 1 time
i was using my marble sniper yesterday, and i decided to do some open firing, just to see if the marbles flew straight. to my amazement, they dont. at all.
at aobut 50 feet, the marbles begen to swerve off sharply in random directions.
does anyone know how to fix this? right now im looking into rifling my copper barrel, not an easy task..............
at aobut 50 feet, the marbles begen to swerve off sharply in random directions.
does anyone know how to fix this? right now im looking into rifling my copper barrel, not an easy task..............
Rifling will not help a spherical projectile whatsoever. You should probably make a hop-up. I don't know why you have this problem, maybe because it's copper? Most of my marble guns shoot perfectly straight. You can also try getting heavier marbles, or steel ball bearings.
Actually the pitching machine that I have adds a forward spin to the ball. Either way, adding the same spin every time would provide more consistency, which you could learn to predict.frankrede wrote:add backspin?
Sounds like they are hooking, much like a golfball.
Noname, Do a bit more research before making a sweeping statement like that. Muskets use a round ball and they gained significantly in accuracy with the advent of rifling.
It is more correct to say that the rifling needs to bite into the projectile to put the spin on it.
It is more correct to say that the rifling needs to bite into the projectile to put the spin on it.
Which would explain why a sabot would help. It would give the rifling something to grip.Hawkeye wrote: Muskets use a round ball and they gained significantly in accuracy with the advent of rifling.
It is more correct to say that the rifling needs to bite into the projectile to put the spin on it.
- VH_man
- Staff Sergeant 4
- Posts: 1827
- Joined: Sat Dec 09, 2006 6:00 pm
- Location: New Hampshire
- Been thanked: 1 time
well, i cleaned out my barrel. it helped somewhat. im going to try to implement some kind of hop-up at the muzzle, mabet just bend a little lip down on the top. just gotta mark it so i put it in the same place every time.
i was thinking of putting it in the back like an airsoft gun, but im too lazy, and it would require me to build a breech, wich i dont have the dough for
i was thinking of putting it in the back like an airsoft gun, but im too lazy, and it would require me to build a breech, wich i dont have the dough for
They have riffled barrels for paintball guns too, the riffling would just make the spin consistant just as does the hop up although a hop up makes the tradjectory more of an arch so it could also make the marbles go in other directions if it wasn't set up properly.
But riffling copper could be quite tricky...
Try porting the barrel, or cutting slots in the muzzle that might help although i would have though that marbles would be heavy enough.
Porting makes a huge difference with some projectiles.
If the barrel isn't tight enough around the marble that wouldn't help because it will be inacurrate and inconsistant, the wadding could help with that.
But riffling copper could be quite tricky...
Try porting the barrel, or cutting slots in the muzzle that might help although i would have though that marbles would be heavy enough.
Porting makes a huge difference with some projectiles.
If the barrel isn't tight enough around the marble that wouldn't help because it will be inacurrate and inconsistant, the wadding could help with that.
A clean, easy way to make a hop-up would be using a hacksaw to cut a notch near the end of the barrel, in the top, then getting an O-ring that fits tightly over the barrel. Put the O-ring on the barrel and slide it down so the O-ring is in the notch, and in the top of the inside of the barrel, you can see the O-ring sticking out a tiny bit.
- frankrede
- Sergeant Major 2
- Posts: 3220
- Joined: Thu Jul 20, 2006 9:47 pm
- Has thanked: 1 time
- Been thanked: 1 time
But thats a pitching machine not a spudgun.robert23 wrote:Actually the pitching machine that I have adds a forward spin to the ball. Either way, adding the same spin every time would provide more consistency, which you could learn to predict.frankrede wrote:add backspin?
Sounds like they are hooking, much like a golfball.
When a human pitcher pitches he adds backspin.
Current project: Afghanistan deployment
Rifling works best when the lans and groves can actually bite into the projectile. With marbles that isn't really possible. Also balls don't fly very well, that's why muskets are so inaccurate compared to modern rifles. try using steel round bar and grinding it to a point and see if it is more accurate.