Page 1 of 2
ABS Cell Core
Posted: Tue Oct 03, 2006 3:45 pm
by Extrusion
Is ABS cell core safe to use in a basic hairspray powered combustion because i dont wanna go and blow myself up lol
it says ABS CELLCORE DWV on the pipe
Posted: Tue Oct 03, 2006 3:51 pm
by iamthewalrus
for hairspray thats just fine, except hairspray is puzzy
, dont use it for propane though.
Posted: Tue Oct 03, 2006 8:16 pm
by frankrede
Yes It works lovely, it burns slightly sometimes and has some nasty fumes but its good.
Posted: Wed Oct 04, 2006 1:15 am
by Pete Zaria
I have an ABS cell core cannon with 4" chamber and 1.5" barrel, propane injected, that's been used for 500+ shots with no problems at all.
Just my experience though. Don't blame me if it doesn't work for you. However, if ABS does fail, its very rare for it to shrapnel. It usually cracks quite clean.
Peace,
Pete Zaria.
Posted: Wed Oct 04, 2006 10:29 am
by Extrusion
Ok awsome cause i got around 6' of 3" ABS cell core hmm would making the barrel and chamber the same width make it suck or does it matter?
Posted: Wed Oct 04, 2006 6:20 pm
by frankrede
Barrel should be smaller than the chamber.
If it is the same size you have horrible performance.
Especially in combustions.
Posted: Wed Oct 04, 2006 9:52 pm
by Extrusion
Ok thanks i was pretty sure it wouldnt work out
Posted: Wed Oct 04, 2006 9:59 pm
by dinsdale
my pneumatic inline cannon has the same diameter barrel as chamber, and can shoot 1000 yards at 150 psi
Posted: Wed Oct 04, 2006 11:23 pm
by frankrede
1000 yards at 150?
That is bullshit.
I want proof.
PDF's.
Word Documents.
Graphs.
I guratee that your cannon doesn not shoot that. 1000 yards?
Thats 10 football fields.
Rethink your thoughts.
Posted: Wed Oct 04, 2006 11:27 pm
by killagorrila99
dinsdale wrote:my pneumatic inline cannon has the same diameter barrel as chamber, and can shoot 1000 yards at 150 psi
yea right dude, we all beleive you.
I supose that this is your gun?
*cough*cough*
Posted: Thu Oct 05, 2006 1:14 am
by frankrede
I have a version like the one above, its built from dwv and i used elmers glue instead of solvent.
lmao.
Thats one big cannon.
Posted: Thu Oct 05, 2006 1:21 am
by MrCrowley
dinsdale its funny how you havnt posted this cannon if its so extraordianry
not many spudguns can shoot 1000yards so why didnt you post it?
Posted: Thu Oct 05, 2006 1:32 am
by frankrede
Hes too good for us.
a cannon like that would need 8 supah valves, massive chamber.And it would have to shoot superman.
Posted: Thu Oct 05, 2006 2:09 am
by MrCrowley
lol maybe it shoots a rocket propelled 'nade
Posted: Thu Oct 05, 2006 6:49 am
by frankrede
In that case thats why he couldnt submit his cannon.
But it doesn't.
He is a 12 year old with a ballvalve cannon that can probably lob a nerf football about 80 yards.
Its a big world for a small kid.