meters

Boom! The classic potato gun harnesses the combustion of flammable vapor. Show us your combustion spud gun and discuss fuels, ratios, safety, ignition systems, tools, and more.
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Thu Mar 29, 2007 8:11 pm

ok, i have seen many propane meters on this site and if i get ABS i will use one too

but for sleekness i was wondering if it is ok to use flexable pipe in the meter, all i have seen use solid pipe, but thats is kinda not an option for me
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Thu Mar 29, 2007 8:19 pm

Yes, although it'll be annoying calculating the volume on it, considering it would bend and probably doesn't have an exact ID. Do some experimenting with it.
User avatar
ArticWolf
Specialist
Specialist
Posts: 129
Joined: Sat Mar 10, 2007 7:18 am
Location: Greenville PA.

Fri Mar 30, 2007 3:57 am

I am sure that if you use pressure rated propane tank hose, (keeps ID the same) or gas line for the house (not sure if it pressure rated though) but that might work. If you can make one from black pipe and fittings to put it together you can use the hose to put it on your cannon. It may be clusey with the all metal pipe and the other good stuff, but it makes the cannon look more stafistacated looking. (this is my opinon no cut down intended) Mine is not attached to the cannon it makes mine less bulky.
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Fri Mar 30, 2007 2:29 pm

with the setup that i plan to use it will be very odd to have solid pipe on it

to get volume cap one end, fill with water, measure water
User avatar
ArticWolf
Specialist
Specialist
Posts: 129
Joined: Sat Mar 10, 2007 7:18 am
Location: Greenville PA.

Sat Mar 31, 2007 1:30 am

The way that I use mine should work for your idea. I have a shrader valve (IE Valve stem for tires) that is on the double thick part at the back of the cannon. I used an air chuck (like the tire pumps have to fill your tires up) on my metering pipe it makes it completely Separate from the cannon the shrader valve and the air chuck both act like a ball valve. If I got you right you want to measure water with this too? I am just trying to help but not sure if I am on the same idea.
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Sat Mar 31, 2007 8:12 am

no no, i would use the water to find the ID so i would know how much to meter
User avatar
ArticWolf
Specialist
Specialist
Posts: 129
Joined: Sat Mar 10, 2007 7:18 am
Location: Greenville PA.

Sat Mar 31, 2007 12:02 pm

Well this might help you, http://www.advancedspuds.com/SpudToolonline.htm I have used it on my cannon. If you know what size the chamber and the barrel is, this will help you find out what size and length the meter pipe is to be and how much propane % (I use 5% but a good one is 4%) to use and the amount of propane pressure to use. A pefect C:B ratio is 1.5:1. Oh I think it tells you the ID of the meter pipe too. I hope I got it right this time :)
SpudBlaster15
First Sergeant 3
First Sergeant 3
Seychelles
Posts: 2400
Joined: Wed Oct 18, 2006 11:12 pm
Has thanked: 2 times
Been thanked: 10 times

Sat Mar 31, 2007 1:23 pm

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 1:43 pm, edited 1 time in total.
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Sat Mar 31, 2007 4:01 pm

well, i allready did the calculations, i know i need bout .5876 psi in the chamber of propane, so ill use P1V1=P2V2 when i get the hose, to get the pressure in the hose i need
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Sat Mar 31, 2007 4:17 pm

"i need bout .5876 psi in the chamber of propane"
It's going to be EXTREMELY hard to get that amount in, why not use a smaller meter?
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Sat Mar 31, 2007 4:47 pm

but that = 4% propane
i thought that was the best percentage
User avatar
hi
Staff Sergeant 2
Staff Sergeant 2
Posts: 1619
Joined: Thu Feb 01, 2007 9:28 pm

Sat Mar 31, 2007 4:54 pm

it is4% it almost exactly right. i have used hose on all my meters and it works just as well as pipe. just make sure its pressure pipe and that th hose clamps are nice and tight, mine hold about 50 psi before they leak, witch is way to much for propane and way. you can even put a pressure gauge on it.
User avatar
noname
First Sergeant 4
First Sergeant 4
Posts: 2698
Joined: Mon Apr 10, 2006 9:19 pm
Location: Bay Area, CA

Sat Mar 31, 2007 5:50 pm

Make the meter smaller, and increase the pressure, so you're not trying to meter in .58 psi.
Freefall
Private 3
Private 3
Posts: 49
Joined: Sat Mar 17, 2007 4:04 pm
Been thanked: 1 time

Sat Mar 31, 2007 6:10 pm

Noname, he's not trying to measure that pressure. He's stating that .58 psi is about 4% of 14.7 psi, and that he needs that much propane in the CHAMBER. To do so, he'll use P1V1 = P2V2 to determine the pressure that he needs in his (much smaller) METER.
sandman
Corporal 2
Corporal 2
Posts: 672
Joined: Thu Mar 15, 2007 6:59 pm

Sat Mar 31, 2007 6:51 pm

yes, exactally what he said
Post Reply