Hybrid ThorJack

[Petitlu]

Yes it's true!
As I saw a nice spark with an atmospheric pressure 10bar as I thought it would work too ...

[Gun Freak]

Hah you would think so, but with 10x more air in the chamber that's a lot more resistance for the spark.

Man, you really don't mess around Very nice work on this project (as always... ), Petitlu. You're brilliant!

[POLAND_SPUD]

damn that's nice... the flash makes it look more like a real gun than a spudgun


ohh and you used loud speakers connectors - I saw them somewhere and I though 'damn these would be useful for an ignition module'

[jackssmirkingrevenge]

I saw them somewhere and I thought 'damn these would be useful for an ignition module when I eventually get round to building my own hybrid in 2073'

[Petitlu]

Thank you!

For the spark, I hope it will be up to Mix40!
To make taking the hybrid, we exceed Mix20?

Today at Mix20 with barrel shot and bullet, we'll see the noise! I think the barrel will attenuate the sound.

I love the form of the flame!

I 30m wire connectors speaker, I used it to take off my water rockets before putting a remote control.
For rockets, I try to beat the world reccord American! (631m)
I polycarbonate manufactured fuselages / aramid.

I'm getting results with ThorJack, it encourages me!

[MrCrowley]

If you do go up to 20x mixes, be careful about using copper barrels. I did this at only a 10x mix:
[youtube][/youtube]



I've been meaning to try higher mixes on my small hybrid but I need a gauge that reads above 145PSI first.

[Petitlu]

Thank you board!
But my barrel is a rifled barrel steel black powder .50 caliber!
Awesome video, I hope you did not get hurt

[jackssmirkingrevenge]

I've been meaning to try higher mixes on my small hybrid but I need a syringe first.

As you reside in a nation of sheep shaggers surely there are plenty of agricultural stores that can supply you with a sizeable one

[MrCrowley]

I've been meaning to try higher mixes on my small hybrid but I need a syringe first.

As you reside in a nation of sheep shaggers surely there are plenty of agricultural stores that can supply you with a sizeable one

I can't use a syringe to meter out 206PSI of air for a 15x mix

[jackssmirkingrevenge]

I can't use a syringe to meter out 206PSI of air for a 15x mix

That's odd, I managed to use syringe fuelling up to 28x mix. Hmmm...

[MrCrowley]

I can't use a syringe to meter out 206PSI of air for a 15x mix

That's odd, I managed to use syringe fuelling up to 28x mix. Hmmm...

Haha, ok well yeah I could but I mean the size of the syringe would be getting a bit much

Wouldn't I'd need a syringe about 6+ litres in volume for a 400-500ml chamber (to fill it in one go)? And then the chamber of my large hybrid is 3-4x bigger than my small hybrid and I want to take that past 10x mixes as well (perhaps not as high as 15x).

Anyway, when do you plan on trying 40x mixes Petitlu?

[Petitlu]

heuuu ... gradually, I'm careful!
Within a week I will be at Mix40! my maximum!
Then the tests are finished and I will make the look of Thorjack

[jackssmirkingrevenge]

Wait, what?

Say you have a 500mL chamber and are using propane.

To 10x, you need to inject 4.2% x chamber volume x 10.

In our case, this is 4.2/100 x 500 x 10 = 210mL

That's two squirts from this: http://www.ebay.co.uk/itm/1-x-100ML-LAR ... 23116d4693

[MrCrowley]

Wait, what?
Say you have a 500mL chamber and are using propane.

To 10x, you need to inject 4.2% x chamber volume x 10.

In our case, this is 4.2/100 x 500 x 10 = 210mL

I'm talking about air.

[jackssmirkingrevenge]

Ohhhhhhhhhhhhhhhhhhh...



Well, you have a shock pump and strong Kiwi arms from... sharpening spear