Page 2 of 2

Unread postPosted: Thu Jun 26, 2008 5:48 pm
Author: psycix
It would be interesting to see how it blows. Please attach a very short piece of barrel, with an end cap on it.
This way you can see which part fails the first. It would be awesome if you could record it on a hi-speed camera.


I'd love to see an 150x oxy/propane mix going boom, recorded on more then 3000 frames per second. :D

Unread postPosted: Thu Jun 26, 2008 5:51 pm
Author: PCGUY
Notify me when a reply is posted - CHECK

Unread postPosted: Thu Jun 26, 2008 6:14 pm
Author: ammosmoke
frankrede wrote:
SpudFarm wrote:Flinger: it will uncover the bare truth of the SCH40 welded steel.

Jack: i can do the PVC test myself, the reason i send steel to larda is my air limit. 11x should be enough to burst any PVC.
I don't think it will solve anything...the caps will probably blow off and what will that prove.
Each piece of pipe is different, and one can't make a truthful statement based off of one inconclusive test.
A proper testing chamber would probably have to be welded by a certified pipe welder(which I will be certified in btw by next june) and have several tests done.


Oh come on.... He is just having a little fun, and getting some insight at the same time. Give it a rest.

Unread postPosted: Thu Jun 26, 2008 6:17 pm
Author: Larda
psycix wrote:I'd love to see an 150x oxy/propane mix going boom, recorded on more then 3000 frames per second. :D


I am afraid that my best camera cant do more than 100 frames per second.


PCGUY: Yes i will do that.

Unread postPosted: Thu Jun 26, 2008 6:25 pm
Author: SpudFarm
i PM you PCGUY.

Unread postPosted: Fri Jun 27, 2008 9:05 am
Author: Hotwired
PCGUY was meaning the checkbox just under the reply section that you tick to recieve emails that theres new posts ^^

I never tick it personally, I end up with gazillions of emails when I get round to my monthly email account visits.


Should be interesting, may even turn out that it won't burst. Stay safe all the same :)

Unread postPosted: Sat Jun 28, 2008 7:40 pm
Author: SEAKING9006
Please do this. For the love of god, make it happen.

Unread postPosted: Sat Jun 28, 2008 10:31 pm
Author: SpudFarm
i will

Unread postPosted: Sun Jun 29, 2008 11:17 am
Author: frankrede
ammosmoke wrote:
frankrede wrote:
SpudFarm wrote:Flinger: it will uncover the bare truth of the SCH40 welded steel.

Jack: i can do the PVC test myself, the reason i send steel to larda is my air limit. 11x should be enough to burst any PVC.
I don't think it will solve anything...the caps will probably blow off and what will that prove.
Each piece of pipe is different, and one can't make a truthful statement based off of one inconclusive test.
A proper testing chamber would probably have to be welded by a certified pipe welder(which I will be certified in btw by next june) and have several tests done.


Oh come on.... He is just having a little fun, and getting some insight at the same time. Give it a rest.
Oh I have no doubt in my mind that it would be badass and on some levels informative on hybrids, I'm just hinting at that some more tests on the subject would be nice