Yes it's true!
As I saw a nice spark with an atmospheric pressure 10bar as I thought it would work too ...
Posted: Tue Mar 20, 2012 6:22 pm
by Gun Freak
Hah you would think so, but with 10x more air in the chamber that's a lot more resistance for the spark.
Man, you really don't mess around Very nice work on this project (as always... ), Petitlu. You're brilliant!
Posted: Wed Mar 21, 2012 12:28 am
by POLAND_SPUD
damn that's nice... the flash makes it look more like a real gun than a spudgun
ohh and you used loud speakers connectors - I saw them somewhere and I though 'damn these would be useful for an ignition module'
Posted: Wed Mar 21, 2012 12:57 am
by jackssmirkingrevenge
POLAND_SPUD wrote:I saw them somewhere and I thought 'damn these would be useful for an ignition module when I eventually get round to building my own hybrid in 2073'
Posted: Wed Mar 21, 2012 2:39 am
by Petitlu
Thank you!
For the spark, I hope it will be up to Mix40!
To make taking the hybrid, we exceed Mix20?
Today at Mix20 with barrel shot and bullet, we'll see the noise! I think the barrel will attenuate the sound.
I love the form of the flame!
I 30m wire connectors speaker, I used it to take off my water rockets before putting a remote control.
For rockets, I try to beat the world reccord American! (631m)
I polycarbonate manufactured fuselages / aramid.
I'm getting results with ThorJack, it encourages me!
Posted: Wed Mar 21, 2012 2:56 am
by MrCrowley
If you do go up to 20x mixes, be careful about using copper barrels. I did this at only a 10x mix:
[youtube][/youtube]
I've been meaning to try higher mixes on my small hybrid but I need a gauge that reads above 145PSI first.
Posted: Wed Mar 21, 2012 3:06 am
by Petitlu
Thank you board!
But my barrel is a rifled barrel steel black powder .50 caliber!
Awesome video, I hope you did not get hurt
Posted: Wed Mar 21, 2012 3:45 am
by jackssmirkingrevenge
MrCrowley wrote:I've been meaning to try higher mixes on my small hybrid but I need a syringe first.
As you reside in a nation of sheep shaggers surely there are plenty of agricultural stores that can supply you with a sizeable one
Posted: Wed Mar 21, 2012 3:55 am
by MrCrowley
jackssmirkingrevenge wrote:
MrCrowley wrote:I've been meaning to try higher mixes on my small hybrid but I need a syringe first.
As you reside in a nation of sheep shaggers surely there are plenty of agricultural stores that can supply you with a sizeable one
I can't use a syringe to meter out 206PSI of air for a 15x mix
Posted: Wed Mar 21, 2012 4:01 am
by jackssmirkingrevenge
MrCrowley wrote:I can't use a syringe to meter out 206PSI of air for a 15x mix
That's odd, I managed to use syringe fuelling up to 28x mix. Hmmm...
Posted: Wed Mar 21, 2012 4:05 am
by MrCrowley
jackssmirkingrevenge wrote:
MrCrowley wrote:I can't use a syringe to meter out 206PSI of air for a 15x mix
That's odd, I managed to use syringe fuelling up to 28x mix. Hmmm...
Haha, ok well yeah I could but I mean the size of the syringe would be getting a bit much
Wouldn't I'd need a syringe about 6+ litres in volume for a 400-500ml chamber (to fill it in one go)? And then the chamber of my large hybrid is 3-4x bigger than my small hybrid and I want to take that past 10x mixes as well (perhaps not as high as 15x).
Anyway, when do you plan on trying 40x mixes Petitlu?
Posted: Wed Mar 21, 2012 4:35 am
by Petitlu
heuuu ... gradually, I'm careful!
Within a week I will be at Mix40! my maximum!
Then the tests are finished and I will make the look of Thorjack
Posted: Wed Mar 21, 2012 4:37 am
by jackssmirkingrevenge
Wait, what?
Say you have a 500mL chamber and are using propane.
To 10x, you need to inject 4.2% x chamber volume x 10.