They ship to australia. If you really want em from auz then http://www.archeryshop.com.au/p/53486/e ... ts-dz.html
they come in 1714
Edit: Australians who need 6mm barrels look inside
-
Davidvaini
- Sergeant 4
- Posts: 1315
- Joined: Tue May 29, 2007 8:58 pm
where does it say 6.035mm ID?
arrow shaft sizes work like this: the first two digits are the outer diameter in 64ths of an inch. so 1714 is 17/64 inches. the second two digits is the wall thickness in 1000th's of an inch, so 1714 is 17/64 inches, with a wall thickness of 14/1000 inches. to get inner diameter we minus two times the wall thickness from the outer diameter. If you covert to cm it comes to 6.035 mm.
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
Hmm truth be told, I can't buy stuff online yet because I'm 17. Hence I'm trying to find an alternative still to find a 6mm ID Barrel.
o.O That arrow shaft however is abit expensive o.O $119.50 for one shaft? maybe I'm reading it wrong :S.
o.O That arrow shaft however is abit expensive o.O $119.50 for one shaft? maybe I'm reading it wrong :S.
It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
No it's fine, I'll feel bad, I don't have any means of paying you back 
.
$10 a shaft is actually pretty cheap.
I'll continue my research. Apparently 9/32" Brakeline fits 6mm BBs perfectly and there's a brakeline store near my house so I'm going to check it out.
Btw are you going beads or actual BBs from that camping store? (sorry off-topic).
. $10 a shaft is actually pretty cheap.
I'll continue my research. Apparently 9/32" Brakeline fits 6mm BBs perfectly and there's a brakeline store near my house so I'm going to check it out.
Btw are you going beads or actual BBs from that camping store? (sorry off-topic).
It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
no probs.
Yeah Im gonna start with the camping store bb's and then try import some proper 0.25g ones. Trust me, you will be pretty disappointed with the accuracy you get from beads, which I tried once.
9/32 probably would do you pretty well, the bundy tube has a 0.5mm wall thickness which gives you an internal diameter of about 6.15mm.
With your barrel size, it really wont be affecting your power too much as long as you dont go above 6.15, so I think you're on the border here. Tightbore barrels are really for accuracy, however, and you will find that the combination of beads and a fairly loose barrel will most likely yield pretty average results. You'll be doin better than me though probably cos I havent even made one yet.
Yeah Im gonna start with the camping store bb's and then try import some proper 0.25g ones. Trust me, you will be pretty disappointed with the accuracy you get from beads, which I tried once.
9/32 probably would do you pretty well, the bundy tube has a 0.5mm wall thickness which gives you an internal diameter of about 6.15mm.
With your barrel size, it really wont be affecting your power too much as long as you dont go above 6.15, so I think you're on the border here. Tightbore barrels are really for accuracy, however, and you will find that the combination of beads and a fairly loose barrel will most likely yield pretty average results. You'll be doin better than me though probably cos I havent even made one yet.
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
Beads can be pretty accurate actually. I've gotten them to go straight for 25metres... beads are only bad if you don't have any hop-up.
Also depends on the design of your guns...
.12g should be good enough because the only real problem with beads is that they have extra blowby because of the hole in the bead. Hopefully I can find a definite source for a barrel though, I'll report any thing I find. Btw I'm a Brisbane... you?
Also depends on the design of your guns...
.12g should be good enough because the only real problem with beads is that they have extra blowby because of the hole in the bead. Hopefully I can find a definite source for a barrel though, I'll report any thing I find. Btw I'm a Brisbane... you?
It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
-
Crna Legija
- First Sergeant 2
- Posts: 2333
- Joined: Sun Jul 20, 2008 5:14 am
- Location: australia
Theres a place that sell steal near my house (vic. Dandenong) and they have stainless steal 8mm od and 6.5mm id its like 8$ a meter and 8 meters long max. I haven't made a small bore guns because i cant find ammo. Dose shotgun shot come in 6mm if so i would make like to make a colax like.
http://www.spudfiles.com/forums/oak-gun ... 17674.html
http://www.spudfiles.com/forums/oak-gun ... 17674.html
'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
--Homer Simpson
Add me on ps3: wannafuk, 8/11/11 cant wait
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
6.5mm is way too much blowby, you'll lose substantial amount of power. Although I guess it would be good enough for a BBMG, just make sure you have hop-up and you'll get power and accuracy.
By the way. it's stainless steel not steal
<,< Sorry but it just seemed like such a simple mistake lol.
By the way. it's stainless steel not steal
<,< Sorry but it just seemed like such a simple mistake lol.
It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
110metres with a .12g BB... your probably right, you're going to need something heavier. Remember that Hop-Up has to come into play for this gun because it puts a spin on the BB. So you can lessen the air-resistance. There alot of guides on how to do that.
And anyway on my journey of finding the right barrel size... Like someone said previously on this topic weed sprayer nozzles are pretty good. I went to go find some at Mitre 10 and I found one but it was 6.5-6.8mm'ish which is pretty darn close which I brought a bead to check. Means that at bunnings you should be able to find a very tight fit. They cost about $5-$10 I assume at bunnings. But the one I saw was $15 which was abit over priced.
And anyway on my journey of finding the right barrel size... Like someone said previously on this topic weed sprayer nozzles are pretty good. I went to go find some at Mitre 10 and I found one but it was 6.5-6.8mm'ish which is pretty darn close which I brought a bead to check. Means that at bunnings you should be able to find a very tight fit. They cost about $5-$10 I assume at bunnings. But the one I saw was $15 which was abit over priced.
It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
-
Moonbogg
- Staff Sergeant 3
- Posts: 1731
- Joined: Mon Oct 13, 2008 10:20 pm
- Location: SoCal
- Has thanked: 153 times
- Been thanked: 100 times
Do they allow Red Ryder BB guns there? Maybe you could buy a cheap BB gun and use the barrel. Or are BB guns BANNED there? If you wanted a Red Ryder carbine action range model air rifle, would you need a firearms certificate?
-
inonickname
- First Sergeant 4
- Posts: 2606
- Joined: Sun Dec 07, 2008 3:27 am
You would need a class A firearm licence, putting it in the same category as a .22 rifle or 12 gauge shotgun.
PimpAssasinG wrote:no im strong but you are a fat gay mother sucker that gets raped by black man for fun
-
littlebro05
- Specialist 4
- Posts: 418
- Joined: Wed Oct 17, 2007 5:04 am
- Been thanked: 1 time
Yes, they are BANNED. Unless you have a Cat A or H (I can't remember) Gun License but then you need to prove too much crap, it's too much effort.
Hence the massive effort in trying to find tight barrels.
Hence the massive effort in trying to find tight barrels
.It's Nerf or Nothing.
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!
Don't start crying when I play this as my hobby, Paintball, Airsoft and Nerf are equally good hobbies, except you can play Nerf in public. Good day! Hmph!