Design suggestions
Posted: Wed Oct 10, 2007 1:27 pm
Suggestions to design and materials: vortex, diameter of barrel (pvc, cooper).....
Page 1 of 2
Posted: Wed Oct 10, 2007 1:34 pm
a 1" barrel on a BBMG probably isnt the best idea...
Posted: Wed Oct 10, 2007 1:35 pm
Semi auto piston...
Posted: Wed Oct 10, 2007 1:44 pm
sorry but u dnt uderstand....HaiThar wrote:a 1" barrel on a BBMG probably isnt the best idea...
there is a barrel .22 or .177 inside of a 1" pipe
Posted: Wed Oct 10, 2007 1:47 pm
Oh, I understand.
Posted: Wed Oct 10, 2007 1:48 pm
i think if you get a co2 or hpa regulator then you could use a paintball co2 or hpa tank but regulate the air and use a blowgun as a valve, like the first pic.
Posted: Wed Oct 10, 2007 1:56 pm
Is threaded pipe a good idea?
Posted: Wed Oct 10, 2007 1:58 pm
The one in your diagram would be *the* BBMG - pressure washer handle instead of the blowgun and 3,000 psi unregulated air from a SCUBA tank, heavenSuggestions to design and materials: vortex, diameter of barrel (pvc, cooper).....
Posted: Wed Oct 10, 2007 2:04 pm
What the diference betwen pressure washer handle and blowgun in efficienci????jackssmirkingrevenge wrote:The one in your diagram would be *the* BBMG - pressure washer handle instead of the blowgun and 3,000 psi unregulated air from a SCUBA tank, heavenSuggestions to design and materials: vortex, diameter of barrel (pvc, cooper).....
Posted: Wed Oct 10, 2007 2:07 pm
I'v to learn more about it.....MaxuS wrote:Semi auto piston...
Posted: Wed Oct 10, 2007 2:08 pm
The difference in this case that a pressure washer handle can... well, "handle" muhc higher pressures, but for normal compressor/bike pump pressures a blowgun will do fine.
Posted: Wed Oct 10, 2007 2:18 pm
Which diameter will be necessary to vortex block????
I'v to use pvc/alumminium block to support 3000psi instead a wooden one?
I'v to use pvc/alumminium block to support 3000psi instead a wooden one?
Posted: Wed Oct 10, 2007 2:23 pm
Jack, you and I truely think alike.
You forgot to mention 9 mm led balls..
One of my dream guns would be the Ultimate Inline made out of steel, in 9 mm and running on unregulated CO2..
anything less would be wimpy hahaha
You forgot to mention 9 mm led balls..
One of my dream guns would be the Ultimate Inline made out of steel, in 9 mm and running on unregulated CO2..
anything less would be wimpy hahaha
Posted: Wed Oct 10, 2007 2:33 pm
Here at brazil i can find bbs 5,5mm max 
Posted: Wed Oct 10, 2007 2:51 pm
That will do just fine.I was just dreaming...
Just use pressure rated materials.
If you use a CO2 or HPA tank you absolutely need a pressure regulator to get the pressure down.If you don't you'll blow up the blowgun.
The reservoir in the second picture will be a disappointment.The air won't last very long and pressure will immediately drop.
Just use pressure rated materials.
If you use a CO2 or HPA tank you absolutely need a pressure regulator to get the pressure down.If you don't you'll blow up the blowgun.
The reservoir in the second picture will be a disappointment.The air won't last very long and pressure will immediately drop.