Where to get barrel?
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
does anyone know where to get barrels from
possibly from homedepot or something
i was looking at some copper tubings but they seem kinda big
does anyone know what size of w.e makes a good barrel for inline vortex
possibly from homedepot or something
i was looking at some copper tubings but they seem kinda big
does anyone know what size of w.e makes a good barrel for inline vortex
Check out hobby shops. They usually have small brass and aluminum tubes. You can also use steel brake line. Just get it at any auto parts store. There are different sizes of break line, i think they make 1/4'', which is what you would want.
"physics, gravity, and law enforcement are the only things that prevent me from operating at my full potential" - not sure, but i like the quote
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
you know you are not an engineer if you have to remind yourself "left loosy righty tighty"
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
[quote="nosebleedXD"]does anyone know where to get barrels from/quote]
If we didn't know, then how would we have barrels on all of our guns lol jk, check hardware stores for brass tubing, also hobby stores, and also automotive stores for brakeline.
If we didn't know, then how would we have barrels on all of our guns lol jk, check hardware stores for brass tubing, also hobby stores, and also automotive stores for brakeline.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
- clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
1/4 brakeline for .177 caliber 4.5mm bbs, and 9/32 for airsoft, many hobby shops have brass tubing
That is all.
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
hey thanks alot guys, ill go check out homedepot tomorrow
if they dont have it, ill check out an auto store
so 1/4th is the size o_O
also in the past i've had trouble building a good vortex block
i'm using a 1 1/2 abs piping tube
does anyone have any suggestions for what size or w.e vortex block or what to use to make it
like homedepot is the best and most convient place for me to get parts atm
if they dont have it, ill check out an auto store
so 1/4th is the size o_O
also in the past i've had trouble building a good vortex block
i'm using a 1 1/2 abs piping tube
does anyone have any suggestions for what size or w.e vortex block or what to use to make it
like homedepot is the best and most convient place for me to get parts atm
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
oh i might also wanna build something like this
but i have a question
http://www.spudfiles.com/forums/mini-uz ... 18044.html
how come the blow gun and barrel isnt flushed at the top?
or it doesn't need to be o_O?
but i have a question
http://www.spudfiles.com/forums/mini-uz ... 18044.html
how come the blow gun and barrel isnt flushed at the top?
or it doesn't need to be o_O?
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
uhh this is what i mean
- Attachments
-
- untitled.JPG (3.57 KiB) Viewed 4042 times
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
oh alright thanks
btw how much fps does your gun shoot?
i might go buy a 3/4" cap tomorrow and try out your build
i'm hoping to make it shoot through cans with 6mm bb's
btw how much fps does your gun shoot?
i might go buy a 3/4" cap tomorrow and try out your build
i'm hoping to make it shoot through cans with 6mm bb's
- clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
My attempt at a vortex cap, its easily rips through cans, take a look at the videos, I have no idea of the FPS.
Good Luck
Good Luck
That is all.
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
loooks beast =] thanks guys
-
- Specialist 2
- Posts: 246
- Joined: Mon Jul 21, 2008 10:23 pm
oh btw do you guys know how i can attach my barrel to the cap?
like i want something like this but what is that threaded thing called?
like i want something like this but what is that threaded thing called?
- Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
You don't attach the barrel to a cap, you use proper fittings to get it down the the correct size for your barrel, and use a compression fitting if you barrel doesn't have threads.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!