Page 1 of 1

What's better and more consistent than a vortex block?

Posted: Thu Jan 05, 2012 10:04 pm
by carl1864
I have been wanting to make a airsoft BBMG for a very long time, but the one thing that always stopped me is I don't like the somewhat inconsistent rate that Vortex blocks seem to deliver. Yes they shoot blazingly fast, but also somewhat sporadic, the BB's don't come out at an even rate.

I've heard of designs before that actually just used a long piece of tubing for the ammo feed, that the BB's sit in one by one, so that when you fire the BBMG the BBs get fed at a consistent (and still blazingly fast) rate.

However I've searched many times throughout the years and never found any good build guides of this seemingly simple design.

Can anyone point me in the right direction? Or suggest any other designs that can shoot as fast as a vortex block but with better consistency in speed.

Posted: Thu Jan 05, 2012 10:17 pm
by Gun Freak
Many of us are on the same quest as you, my friend. Unfortunately, no perfect concept has been thought of yet. Blow forward bolts work, but sometimes they don't even feed perfectly, and they are hard to build. Detents are strong, and somewhat consistent, but they don't feed perfectly. Clouds=crap. Vortexes > clouds, but still crap. Pop off + QEV combos are good but even then you need a good loading mech. JSR will tell you tee mags work... Many people have different opinions, but you never see any new ideas implemented. Airsoft guns aren't the most popular type of launcher here and most of them are clouds/vortexes. I suggest you do some research and think about what type of system will suit you best... Or maybe think of a new type and give it a shot. Hope this helped a little.

Posted: Thu Jan 05, 2012 10:29 pm
by carl1864
I know this system has been done before heres a great example



Notice how consistent the rate of fire is. It does have a hiccup here and there, but for the most part it seems like one of the best I've seen. He's using this tube fed method, however when you go on his site to look at the so called "tutorials", they are severely lacking in information. A few pictures, but with all sorts of important details missing.

I'd really like to build a gun based off of this firing method, but just haven't been able to find enough details yet to do so.

Re: What's better and more consistent than a vortex block?

Posted: Thu Jan 05, 2012 10:31 pm
by evanmcorleytv
carl1864 wrote:I have been wanting to make a airsoft BBMG for a very long time, but the one thing that always stopped me is I don't like the somewhat inconsistent rate that Vortex blocks seem to deliver. Yes they shoot blazingly fast, but also somewhat sporadic, the BB's don't come out at an even rate.

I've heard of designs before that actually just used a long piece of tubing for the ammo feed, that the BB's sit in one by one, so that when you fire the BBMG the BBs get fed at a consistent (and still blazingly fast) rate.

However I've searched many times throughout the years and never found any good build guides of this seemingly simple design.

Can anyone point me in the right direction? Or suggest any other designs that can shoot as fast as a vortex block but with better consistency in speed.
Gun Freak wrote:Many of us are on the same quest as you, my friend. Unfortunately, no perfect concept has been thought of yet. Blow forward bolts work, but sometimes they don't even feed perfectly, and they are hard to build. Detents are strong, and somewhat consistent, but they don't feed perfectly. Clouds=crap. Vortexes > clouds, but still crap. Pop off + QEV combos are good but even then you need a good loading mech. JSR will tell you tee mags work... Many people have different opinions, but you never see any new ideas implemented. Airsoft guns aren't the most popular type of launcher here and most of them are clouds/vortexes. I suggest you do some research and think about what type of system will suit you best... Or maybe think of a new type and give it a shot. Hope this helped a little.
Have you two forgotten about this?

http://neospud.com/mark2/mark2.html

Type in "ultimate inline mark 2" on youtube for videos. It's PERFECT for what you both want to achieve.

Posted: Thu Jan 05, 2012 10:37 pm
by Gun Freak
Dude that's just a vortex :roll:

Way too high ammo consumption for my tastes.

Re: What's better and more consistent than a vortex block?

Posted: Fri Jan 06, 2012 1:47 am
by jackssmirkingrevenge
carl1864 wrote:I've heard of designs before that actually just used a long piece of tubing for the ammo feed, that the BB's sit in one by one, so that when you fire the BBMG the BBs get fed at a consistent (and still blazingly fast) rate.

However I've searched many times throughout the years and never found any good build guides of this seemingly simple design.
[youtube][/youtube]

Posted: Fri Jan 06, 2012 2:38 pm
by wyz2285
Jack that gun you would need 10min reload and 10 seg to shot :lol:

Posted: Fri Jan 06, 2012 7:42 pm
by carl1864
I'm OK with reload times. I think it would be worth the tradeoff to have a consistent, even stream of fire.

I'm sure I could easily make some little electric hopper or something to load the ammo tube fast. Or you could even make a little vortex block hopper just to use for reloading to fill that ammo tube fast.

I just haven't found many good build details. Like do you have the ammo tube at the same PSI as the barrel, or do you have it less, or what. Seems like if the pressure in the ammo tube was less, that much of the air going to fire the thing could push the bbs the wrong way. Also details like what that "non repeat valve" is on the kuba t1000, etc.

Need more good solid details or build info so I can make one.

Posted: Fri Jan 06, 2012 10:05 pm
by ramses
Someone made a BBMG style airsoft gun out of an airsoft hopup and magazine. They did not use the nozzle as an interrupter, and used a 12g CO2 adapter as the air source/trigger.

You could then easily use midcap/highcap magazines off the shelf.

JSR providing link in 3... 2... 1...

Posted: Fri Jan 06, 2012 10:15 pm
by warhead052
Mag fed full auto you say? I think I also beat JSR to providing a link.

Posted: Sat Jan 07, 2012 1:40 am
by jackssmirkingrevenge
warhead052 wrote:Mag fed full auto you say? I think I also beat JSR to providing a link.
Think again ;)
I'm sure I could easily make some little electric hopper or something to load the ammo tube fast. Or you could even make a little vortex block hopper just to use for reloading to fill that ammo tube fast.
Some ideas:

http://www.spudfiles.com/forums/viewtop ... tml#108914

http://www.spudfiles.com/forums/reliabl ... 19285.html

This was also an interesting design though the details originally posted by the maker seem to have disappeared, presumably as he was selling plans:

http://www.spudfiles.com/forums/electro ... 22259.html
Jack that gun you would need 10min reload and 10 seg to shot
True, but it fires so clucking fast that anything you were firing at would have disappeared by the time the mag is empty ;)

Posted: Sat Jan 07, 2012 3:49 am
by wyz2285
True, but it fires so clucking fast that anything you were firing at would have disappeared by the time the mag is empty
My bbmg vortex does the same job, and I can load 1000 bbs in 50seg :D and shot them all in 10 seg :twisted: and the accuracy is good because the adjustable detent
Oh and this and this are very interesting

Posted: Sat Jan 07, 2012 10:25 am
by warhead052
jackssmirkingrevenge wrote:
warhead052 wrote:Mag fed full auto you say? I think I also beat JSR to providing a link.
Think again ;)
Dammit jack, never stop do you? :P Ah well. Maybe some day I will beat you.