8)Airsoft QEV + popoff valve help
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
By any chance do you know how much psi comes out of the hpa tanks regulator standardly? Or will i have to buy a regulator? Ps your being alot of help to me thanks alot i couldnt appreciate it more!!!! 8)
8)Out of standard paintball reg the output pressure is around 800psi so you will have to use a regulator to regulate it down to a safe pressure. If u have some money to spare u could always use a palmer stabilzer regulator it's a good investment from my point of view.
-
jackssmirkingrevenge
- Five Star General
- Posts: 26179
- Joined: Thu Mar 15, 2007 11:28 pm
- Has thanked: 543 times
- Been thanked: 321 times
Ninja paintball tanks can be taken down to 450 psi by adjusting the tank's built in reg.
The SLP reg can go down to 300 psi: http://www.ansgear.com/Ninja_Pro_SLP_Se ... g45slp.htm
The SLP reg can go down to 300 psi: http://www.ansgear.com/Ninja_Pro_SLP_Se ... g45slp.htm
hectmarr wrote:You have to make many weapons, because this field is long and short life
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
Will i be able to put the slp 4500 on a 3000 tank? Edit- i found it nvrm
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
u guys know any good qevs to use for like up to 1000 psi
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
or just any real good one ... i see alot of videos with high pressure running through what looks like regular qevs ... can u just overfill them? and if so how much more
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
also what metering valve should i use.... im trying to keep this all under200
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
jacksmirkingrevenge can u help me out and what is teflon tape good enough , what psi?
Quadruple posting!! Please learn to edit your postings.
Have you ever built a pneumatic cannon before? All your simple questions seem to indicate that you have not. You are setting your goals to high.
You should start off with a lower pressure cannon first (less than 100 psi) to see if you can be successful.
Stay away from higher pressures until you comprehend and understand how dangerous higher pressures can be.
You need to do a lot more research and Google more!
Have you ever built a pneumatic cannon before? All your simple questions seem to indicate that you have not. You are setting your goals to high.
You should start off with a lower pressure cannon first (less than 100 psi) to see if you can be successful.
Stay away from higher pressures until you comprehend and understand how dangerous higher pressures can be.
You need to do a lot more research and Google more!
-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
More like sextuple... 
Check out the showcase. You can model a gun off the examples you see there. And, make sure you read the comments just to be sure you can make adjustments as the pros suggest, just to be safe. Self discovery is a great thing! Once you've done that you can ask a bunch of questions.
Check out the showcase. You can model a gun off the examples you see there. And, make sure you read the comments just to be sure you can make adjustments as the pros suggest, just to be safe. Self discovery is a great thing! Once you've done that you can ask a bunch of questions.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
i know guys thanks for the tips and yes it is my first im going to start with the bare minimum parts for like 60 bucks with my regular air compressor , i just dont want to have to buy 2 qevs and cant seem to find one that is high pressure for later ... and another reason is i do not have the money to be building expieriment guns so i kinda would like to do it in one nice one and might make one smaller one when i get some more money and i modeled the design off of a youtube video that had a nice setup and was working well plus it had a tutorial-
Gun Freak
- Lieutenant 5
- Posts: 4971
- Joined: Mon Jan 25, 2010 4:38 pm
- Location: Florida
- Been thanked: 7 times
You can buy a nice quality European style QEV off eBay, a style that has been used with very high pressures. It will handle your first project and it sure to handle anything you throw at it later on when you become more experienced, and they can be bought for very fair prices (under 20 bucks), which leaves plenty left in your budget for the rest of the gun.
OG Anti-Hybrid
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
One man's trash is a true Spudder's treasure!
Golf Ball Cannon "Superna" ■ M16 BBMG ■ Pengun ■ Hammer Valve Airsoft Sniper ■ High Pressure .22 Coax
Holy Shat!
-
isnotaustin
- Private 3
- Posts: 55
- Joined: Tue Jul 02, 2013 4:37 pm
are you talking about those amico little black box ones? link please 
Last edited by isnotaustin on Sun Jul 07, 2013 8:58 pm, edited 2 times in total.