Page 2 of 3
Re: .177 CALIBER CHALLENGE
Posted: Wed Jun 18, 2014 7:37 pm
by Boomer58cal
bravootome wrote:5 shoots by 20 m with my 6 mm QEV - 0.40 madbull bb's--- not for the challenge ---
I think that's a perfectly acceptable group at 20 meters.
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Thu Jun 19, 2014 12:00 am
by bravootome
wyz2285 wrote:I take 40m just fine, even a cheapo AEG can hit 40m...
with one of your homemade airrifles, not AEG......
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Thu Jun 19, 2014 7:22 am
by wyz2285
That's my point, if a cheap aeg can do it, a homemade hammer valve can certainly do the same.
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Sat Jun 21, 2014 11:13 am
by wyz2285
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Sat Jun 21, 2014 1:03 pm
by bravootome
wyz2285 wrote:Hope I'm not the only guy working
I brought a new 6 mm steel barrel
Your pin valve looks kind of "unsized"
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Sat Jun 21, 2014 1:26 pm
by wyz2285
Your pin valve looks kind of "unsized"
It's 5mm port, enough for 4.5mm cal.
Finished the sling shot style hammer, should save me some air consumption
and give me a couple more shots.
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Thu Jun 26, 2014 1:24 pm
by wyz2285
Milled the receiver and fixed the barrel, it's finally coming together
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Thu Jun 26, 2014 3:42 pm
by jrrdw
Awesome! Absolutely awesome...How's it shooting? Nice???
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Thu Jun 26, 2014 3:45 pm
by wyz2285
It doesn't shoot yet, no trigger. But the sling shot hammer is working, I can the valve open by just swing the gun up an down with hammer inside without spring.
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Fri Jun 27, 2014 3:12 am
by bravootome
wyz2285 wrote:It doesn't shoot yet, no trigger. But the sling shot hammer is working, I can the valve open by just swing the gun up an down with hammer inside without spring.
pretty nice, if you upload another photo...please put one with .......how did you put the caps to the air cylinder ...had you made threads ?
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Wed Nov 05, 2014 1:00 pm
by BartSkillZ
Hey there,
Where did you get these hammervalve parts from?
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Wed Nov 05, 2014 1:15 pm
by wyz2285
Hey there,
Where did you get these hammervalve parts from?
Hum? I made them obviously...
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Sun Mar 15, 2015 7:02 am
by Juggernaut12121
wyz2285 wrote:Milled the receiver and fixed the barrel, it's finally coming together
I was about to try the challenge until I saw this
That and I have yet to make a rifle
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Fri Apr 03, 2015 3:16 pm
by jrrdw
I was about to try the challenge until I saw this
That and I have yet to make a rifle
You still have time...
Re: .177 CALIBER CHALLENGE - REVISED
Posted: Sun Apr 05, 2015 12:42 am
by bravootome
I was about to try the challenge until I saw this
That and I have yet to make a rifle[/quote]
it dosnt mean you can not beat it up even if you use what you got........
