Hybrid cartridge.
- clemsonguy1125
- Sergeant 5
- Posts: 1485
- Joined: Tue Jul 21, 2009 4:00 pm
- Location: East Coast
Thats an even better idea.
That is all.
-
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Sorry for the bump. But I finally got around to trying to shoot a cork, and it didn't work. All I heard was a pop of the burst disk and then pfff of the cork just sliding a bit. Didn't even clear the barrel. Any suggestions? Again sorry for the bump.
-
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
-
- Staff Sergeant 3
- Posts: 1769
- Joined: Mon Mar 21, 2011 5:41 pm
Double post again, I know... But I ran into a problem. Butane is no longer working, even at a 1x mix. I double layered the pvc with a 1 1/4" ID pvc pipe, and filled with epoxy and hot glue, but the butane won't ignite. The spark gap is about 10mm, and I get a nice big fat spark from it, so that can't be the problem. It may be the burst disks not breaking at a low enough pressure, I may try it again with a different type.