Page 2 of 3
Posted: Wed Jul 11, 2007 6:39 pm
by userjjb
What grade of aluminum did you use, where did you get it from, and what was the approximate cost?
Posted: Wed Jul 11, 2007 7:13 pm
by VH_man
wait, did you say 7X mixture?
you are my (new) hero........ just dont die on us.
you should get yourself a chrony. id bet alot of money those pine slugs are breaking the sound barrier...............
Posted: Wed Jul 11, 2007 7:38 pm
by veginator
thats probably the highest mix any one has tried yet.
Posted: Wed Jul 11, 2007 8:55 pm
by DYI
I think someone on spudtech tried 8x in a plastic hybrid, or at least they claimed to. No one really believed them due to the fact that they were still living though...
Posted: Wed Jul 11, 2007 9:31 pm
by noname
Veginator, I've done 7x and 8x in my steel hybrid (still the 6" BBQ ignitor wires though), along with 7x and 8x mixes in a long, small diameter pipe while seeing if I could get DDT to occur.
That gun is totally sick, man. That aluminum chamber must have cost quite a bit, but it's probably worth it.
Posted: Wed Jul 11, 2007 9:36 pm
by mopherman
noname wrote:along with 7x and 8x mixes in a long, small diameter pipe while seeing if I could get DDT to occur.
well, did you get what you were looking for?
Posted: Thu Jul 12, 2007 3:31 am
by sniperjosh
Hi all, I have a shooting chrony jus tnot setup for low-light usage yet. The chamber didnt cost me that much, As the raw piece isnt that big (bought off ebay), and a fitter and turner friend of mine did all the machining for $70AU - the aluminium is 2024 with tensile strength of 70,000PSI. I will be using it at 10x mixes, beyond that im not sure, as it sort of makes it a bitch to pressurise. Dont worry i wont die lol, nothing is near it when fired. I do really hope that the pine slugs are supersonic
. I would like to try to incur DDT, and also solve the debate about propane liquifying in hybrids @ 90psi chamber pressure. I hope myself and the community will gain some insight into hybrids @ higher mixtures through this gun. - ive been tied up a bit last few days with work etc so no progress has been made
Posted: Thu Jul 12, 2007 4:55 am
by f.c
fuck i don't know much about hybrids but i know 10x mixtures are powerful.
Posted: Thu Jul 12, 2007 8:22 am
by veginator
Veginator, I've done 7x and 8x in my steel hybrid
well why didn't you post it?
Posted: Thu Jul 12, 2007 9:58 am
by noname
I did, before the bastard stopped working.
Mopherman, read SpudBlaster's Hybrid, the oringinal topic.
Posted: Fri Nov 23, 2007 7:16 pm
by The Kid
hold on, you said you were from aus and that you used a 100kv stun gun how in jesus christ name did you get a stungun in australia.
Posted: Fri Nov 23, 2007 7:41 pm
by rna_duelers
There are ways, you can also just get the guts out of one sent to you and then it's only a high voltage circuit not a stun gun at all.You could also do what one of my friends did and buy a cattle prod,works great and also hurts like a bitch!
Don't no if this member is still active but...Is there any oxide residue on the inside of your chamber after firing?
Posted: Fri Nov 23, 2007 7:55 pm
by Maniac
whoa 10 mix that is insane you need to get a vid a damage shots of this baby ilove the gun i hope you dont hurt yourself in the process your a maniac.
woot 100 posts
Posted: Fri Nov 23, 2007 7:59 pm
by The Kid
yeah i was wondering if it was just the circets and if they were illegal. my sisters boyfriend Said that you could use cattle prods but i never really thought about it and i think there might be 1 or 2 prods at the family farm my pop might let me use
Posted: Fri Nov 23, 2007 8:00 pm
by Novacastrian
The Kid wrote:hold on, you said you were from aus and that you used a 100kv stun gun how in jesus christ name did you get a stungun in australia.
Contact BC Pneumatics, he will send you a nice stungun minus the outside (just the internals) and label it *high voltage circuitry* or some sort.
