Drop Mortar with Safety Device
Posted: Wed Feb 02, 2005 8:11 pm
PCGUY OKED THIS.
Ok, here is the diagram.
<img src="http://tinypic.com/1izvir">
SO you load, the tennis ball golfball or whatever in the barrel.(depends on what size you make the mortar) You then walk like 10 feet away then, and pull the string. This pulls the pvc/lexan disc out of the way letting the tennis ball (or anything else) drop and on the way it slides against the on off switch, this turns on the stungun. This will light the fuel you previously sprayed into the T-Fitting of the cannon. Then while the tennis ball is shooting away, it will hit the switch off on its way out.
THe spring is there to lessen the wear and tear on the on off switch. Its almost like a suspension on a car, making it easier on the frame...
Any suggestions, Critisisms, thoughts, ideas?
Ok, here is the diagram.
<img src="http://tinypic.com/1izvir">
SO you load, the tennis ball golfball or whatever in the barrel.(depends on what size you make the mortar) You then walk like 10 feet away then, and pull the string. This pulls the pvc/lexan disc out of the way letting the tennis ball (or anything else) drop and on the way it slides against the on off switch, this turns on the stungun. This will light the fuel you previously sprayed into the T-Fitting of the cannon. Then while the tennis ball is shooting away, it will hit the switch off on its way out.
THe spring is there to lessen the wear and tear on the on off switch. Its almost like a suspension on a car, making it easier on the frame...
Any suggestions, Critisisms, thoughts, ideas?