Old PVC

A place for general potato gun questions and discussions.
User avatar
TheTrooper
Specialist
Specialist
Posts: 165
Joined: Sun Nov 04, 2007 4:15 am

Tue Nov 20, 2007 2:57 pm

Hey, i have a question. My friend has some great varieties of Pressurized PVC pipe, unfortunately its been in his attic for a long time (I do not know exactly) i will only be using the PVC pipe for a barrel so do you think it will be okay? Yes, i searched.
User avatar
benstern
Corporal 5
Corporal 5
Posts: 908
Joined: Wed Sep 21, 2005 8:24 pm

Donating Members

Tue Nov 20, 2007 3:41 pm

If it is not discolored, it should be okey. However you should hydro test it.
User avatar
TheTrooper
Specialist
Specialist
Posts: 165
Joined: Sun Nov 04, 2007 4:15 am

Tue Nov 20, 2007 3:44 pm

Hydro test? Sorry but i do not know what that is.
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Tue Nov 20, 2007 3:47 pm

test it using water pressure (like using a hose to fill the chamber with water), hence the word "hydro". You will need an appropriate hose fittings for this.
Last edited by SpudUke5 on Tue Nov 20, 2007 3:48 pm, edited 1 time in total.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
ALIHISGREAT
Staff Sergeant 3
Staff Sergeant 3
Posts: 1778
Joined: Sat Aug 25, 2007 6:47 pm
Location: UK

Tue Nov 20, 2007 3:48 pm

its where you fill it with water and pressurize it, its far safer than using air because it won't blow up and stick shards of plastic in you.
User avatar
TheTrooper
Specialist
Specialist
Posts: 165
Joined: Sun Nov 04, 2007 4:15 am

Tue Nov 20, 2007 3:50 pm

Thanks so much, i'll make sure to check if it doesnt have any color.
User avatar
f.c
Specialist 3
Specialist 3
Posts: 340
Joined: Sun Jul 08, 2007 2:40 am

Tue Nov 20, 2007 3:54 pm

youre looking for a yellowish tinge.
can i be a sasquatch ?
iknowmy3tables
Staff Sergeant
Staff Sergeant
United States of America
Posts: 1596
Joined: Fri Dec 15, 2006 3:57 pm
Location: maryland
Has thanked: 3 times
Been thanked: 9 times

Tue Nov 20, 2007 4:01 pm

but remember if it's cpvc then the yellow tint is normal, cpvc also uses a diffrent sizing from pvc so pipe sizes are narrower than their pvc equivalent
User avatar
MikeNice
Specialist
Specialist
Posts: 115
Joined: Tue Nov 28, 2006 4:37 pm
Location: Queen Creek, AZ

Tue Nov 20, 2007 4:45 pm

I would find out how old is the pipe you're considering using. Materials that have undergone many heating / cooling cycles (expansion / contraction) have a tendency to become weakened. I honestly don't know if this would hold true with pvc or not, but if it's really old I wouldn't use it. Just me though, I'm usually over-cautious. Just a thought.
Your face is going to freeze like that. http://iplaaz.freehostia.com/
User avatar
Maniac
Specialist 4
Specialist 4
Posts: 496
Joined: Tue Oct 23, 2007 5:55 pm
Location: Right behind you

Tue Nov 20, 2007 5:21 pm

if you use find another piece of pvc you can slevee it in and youll be fine
Coodude26 wrote:
People who laugh really hard at stuff that pisses you off/you getting hurt, who then say "I'm sorry, I can't stop" but you know they easily could.

Mr.C: That's not as easy as you think. It's like me kicking you in the balls and telling you to stop crying.
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Tue Nov 20, 2007 8:19 pm

A better barrel choice would be ABS. Although PVC is often pressure rated, it usually has a low impact resistance, which is the main criteria for a barrel material. ABS is cheap, available, and can be used as barrels on launchers using hundreds of psi.

Barrels are, however, usually subjected to the least stress of any part of a launcher, so unless the PVC is in incredibly bad condition, or you plan on using upwards of 500 psi, it really should be fine. A little eye protection never hurts though. And neither does a trip to the hardware store.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
TheTrooper
Specialist
Specialist
Posts: 165
Joined: Sun Nov 04, 2007 4:15 am

Tue Nov 20, 2007 8:26 pm

"And neither does a trip to the hardware store." Hey i dont want to buy more, because i dont want another 10 foot piece in my garage (And PVC cant be glued to ABS, and it cant hold hundreds of PSI, not pressure rated.)
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Tue Nov 20, 2007 8:37 pm

I have personally used large bore (over 1.5") ABS barrels to well over 400 psi on many occasions with pneumatics, as well as on an Oxy-MAPP hybrid, with no failures whatsoever. Also, if ABS does rupture, it only tears open, with no shrapnel. I wasn't recommending using non-pressure rated ABS for a pressure vessel, I was recommending it as a barrel material. As for bonding, that's what threads are for. If you permanently glue your barrel to the chamber, you can never use a different barrel, so threads really should be used anyway. Never use old plastic pipe as a pressure vessel.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
spudgunnerwryyyyy
Specialist 2
Specialist 2
Posts: 261
Joined: Thu Jul 12, 2007 10:54 pm

Tue Nov 20, 2007 9:18 pm

Listen to dyi he's the man, abs rocks cus its so soft, get a 3"x1' piece and try to break it. compare to pvc and you will be amazed.
The Doors are awesome, Led Zeppelin is amazing, and Motley Crue kicks @$$.
Go Orange Box

RAP SUCKS
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Tue Nov 20, 2007 9:42 pm

I've taken 1.5 " ABS and crushed it in a vice until it was completely flat. Try that with PVC and it will shatter. This is what makes it such a good barrel material. There are obviously limits, but it can survive repeated spikes to pressures well over its burst pressure.

This is also the reason behind the fact that pressure rated ABS is the only kind of plastic pipe that building codes allow to be used with pressurised gases without a shrapnel-proof housing. Non pressure rated ABS is the same thickness, just minus the quality control. Not to be trusted with continuous pressure, but ideal for barrels.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
Post Reply