i like hybrids and pneumatic with small bore penetrating stuff and not a big ass gun on a stand. but i like to look at videos of big guns. that way i don`t need to spend like 20 minutes to load the gun and pick up all the aftermath.
what type of cannon do you like?
-
SpudFarm
- First Sergeant 3
- Posts: 2571
- Joined: Sat Nov 04, 2006 9:39 am
- Location: Norway Trondheim area
i was reading the thread about this when i start to understand how different all of us are when it comes to all the different cannons out there! i will have your gun of choice write like i do under
i like hybrids and pneumatic with small bore penetrating stuff and not a big ass gun on a stand. but i like to look at videos of big guns. that way i don`t need to spend like 20 minutes to load the gun and pick up all the aftermath.
i like hybrids and pneumatic with small bore penetrating stuff and not a big ass gun on a stand. but i like to look at videos of big guns. that way i don`t need to spend like 20 minutes to load the gun and pick up all the aftermath.
-
jrrdw
- Moderator
- Posts: 6569
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
that way i don`t need to spend like 20 minutes to load the gun and pick up all the aftermath.
HAHAHAHAHAHAHAAAA!!!!!! Thats the funniest thing I've read in a while! Me, the bigger the better.
HAHAHAHAHAHAHAAAA!!!!!! Thats the funniest thing I've read in a while! Me, the bigger the better.
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
Me, well I like big to small bore pneumatics, but am currently limited by low pressures of only 110psi. And since PVC is so expensive here I can't mess around with designs so I like fool-proof guns that can't go wrong yet are still powerful.
But I am exploring my options, I have plans for a Co-Axial Pneumatic, Advanced Combustion and Copper Pneumatic.
But I am exploring my options, I have plans for a Co-Axial Pneumatic, Advanced Combustion and Copper Pneumatic.
I like large bore, because in my case, there is alot of ammo options, and i like things blown up, like using bombs, except not in this case. I like the large power, but small bore and very powerful is something i also like. But if i were to choose between the 2, i would chose large bore.
Thats why i am building a new pneumatic piston that will be 4 inches, and 3 inch porting barrel, but im not sure if it should be housed in a tee or coaxial, for purposes of performance and storage reasons.
Thats why i am building a new pneumatic piston that will be 4 inches, and 3 inch porting barrel, but im not sure if it should be housed in a tee or coaxial, for purposes of performance and storage reasons.
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
-
SpudFarm
- First Sergeant 3
- Posts: 2571
- Joined: Sat Nov 04, 2006 9:39 am
- Location: Norway Trondheim area
crowley if you want to go simple with the copper pneumatic i suggest you try out the design of my 42mm piston gun it is powerful and easy to carry around. also not much difference in power on the 30psi less you can get. but i guess you are the one to go simple
-
mega_swordman
- Corporal
- Posts: 526
- Joined: Wed Nov 29, 2006 2:37 pm
- Location: Bay Area, California
- Contact:
I personally like handheld cannons with relitivey small bores. Contrary to this, the next two cannons I want to do will be large bore, but will still be handheld (bazookas)
I also can't help but notice that in every message from spudfarm on this topic included a smily.
I also can't help but notice that in every message from spudfarm on this topic included a
smily."Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity." George S. Patton
-
SpudFarm
- First Sergeant 3
- Posts: 2571
- Joined: Sat Nov 04, 2006 9:39 am
- Location: Norway Trondheim area
ragnarok i knew you will say that (notice the ) and HEAL is one of my favorite coppers on this forum.
and for mega_swordman i am also going in to building a big bore soon but where i live you cant get pressure rated pvc so i have to wait for some sort of steel
(notice the ) and HEAL is one of my favorite coppers on this forum.and for mega_swordman i am also going in to building a big bore soon but where i live you cant get pressure rated pvc so i have to wait for some sort of steel
-
jrrdw
- Moderator
- Posts: 6569
- Joined: Wed Nov 16, 2005 5:11 pm
- Location: Maryland
- Has thanked: 39 times
- Been thanked: 22 times
- Contact:
YES! That way we don't have to click on a link to find out what your saying.Ragnarok wrote:Need I say more?
-
mega_swordman
- Corporal
- Posts: 526
- Joined: Wed Nov 29, 2006 2:37 pm
- Location: Bay Area, California
- Contact:
Thinked isn't a word. You mean thought. (Sorry, I had to.)spudfarm wrote:yeah i thinked ( HEAL ) the moment i saw that
edit: whoa 100
I really like HEAL as well; it is probably the only copper cannon I like.
EDIT: Ah, I didn't know. Thanks for informing my Crowley
Last edited by mega_swordman on Mon Jan 21, 2008 5:02 pm, edited 1 time in total.
"Never tell people how to do things. Tell them what to do and they will surprise you with their ingenuity." George S. Patton
-
MrCrowley
- Moderator
- Posts: 10078
- Joined: Fri Jun 23, 2006 10:42 pm
- Location: Auckland, New Zealand
- Been thanked: 3 times
English isn't his first language mega.mega_swordman wrote:Thinked isn't a word. You mean thought. (Sorry, I had to.)spudfarm wrote:yeah i thinked ( HEAL ) the moment i saw that
edit: whoa 100
I really like HEAL as well; it is probably the only copper cannon I like.
Edit: Whoa 4065
Small bore metal pneumatics with no pressure limit.
Maybe someday I'll have a rummage about at 33mm but no higher.
I'm a bit non-committal about large bore cannons, they never seem to be used at their full potential to me.
If I ever have the opportunity to be somewhere for a while with a very large open space, miles from anyone I'll make a plastic bottle launcher that just runs off bog standard compressor pressure of 100-150psi. Wouldn't want anyone to get upset by what I would pack the bottles with after all.
Maybe someday I'll have a rummage about at 33mm but no higher.
I'm a bit non-committal about large bore cannons, they never seem to be used at their full potential to me.
If I ever have the opportunity to be somewhere for a while with a very large open space, miles from anyone I'll make a plastic bottle launcher that just runs off bog standard compressor pressure of 100-150psi. Wouldn't want anyone to get upset by what I would pack the bottles with after all.