Page 1 of 1

Where to Find SDR 26 WP 160 PSI

Posted: Wed Jan 23, 2008 11:42 am
by socoj2
I need 2.5" in this.


Or other ideas for a tennis ball barrel. as They just DO NOT fit down the 2.5" sch40 i have. most balls im finding are 2 5/8

Posted: Thu Jan 24, 2008 4:42 pm
by BC Pneumatics
TB's are a pretty tight fit inside a sch40 barrel. Using a 1.5" PVC ramrod will make loading a lot easier. I have also heard that some discount store tennis balls are not only cheaper, but a bit smaller than regular ones.

Posted: Thu Jan 24, 2008 8:56 pm
by daberno123
I think that only regulation sized tennis balls fit in sch 40. Are you using off brand cheapos or good ones?

Posted: Thu Jan 24, 2008 10:02 pm
by socoj2
There are Decent and came from a country club that a Very Large Tennis Championship is played at.

I need to have a fit that doesnt fight tight, for this loading system. that is going to be 2 5/8s id the only thing i could find close to that is the SDR 26.

I got some 2.5" sch 40 from BC earlier this month. And it is a VERY tight fit

Schedule 120 3" PVC would work as well..

Posted: Thu Jan 24, 2008 10:54 pm
by Pilgrimman
http://www.ryanherco.com/auto/price.cfm ... 10&CAT=030

I found this a while ago. I don't know about minimum order quantities, but SDR 26 is there.

Posted: Fri Jan 25, 2008 6:44 am
by socoj2
Excellent ill call them today.