Carnage, Version 2.0 (shot through 1/4" steel plate)

A place for general potato gun questions and discussions.
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Sun Mar 02, 2008 8:12 pm

Have you ever noticed that you can try to solve a problem for months without ever achieving anything, and then realise one day that the solution had literally been sitting in your shop the whole time?

Today I took what is likely the most impressive shot I have ever done, and the ammunition was nothing more sophisticated than an ancient hole punch wrapped in duct tape.

I've been trying to shoot through a piece of 1/4" steel plate for about 5 months now, ever since I upgraded the SCTBDC to high pressure bottled gas, and today I achieved that milestone of performance which very few spudguns will ever reach. The obvious solution came to me at work when I was looking on McMaster to see what kind of steel I should get for my APFSDS rounds. I saw "S7 tool steel", read the description, and realised that I already has some on hand, pre-sharpened. After a few scratch tests, I confirmed that it would likely be hard enough, and proceeded to convert it to a non-finned, non-discarding sabot type ammunition to save weight over the APFSDS format.

I loaded up the SCTBDC (which has a ridiculous number of different possible configurations now), using the 2" valve, 2" x 144" barrel, a 40 layer (~340 psi) disk, ~230 ci of chamber and the 150 gram hole punch, which weighed about 170 grams with the sabot and wadding (an old rag). The target was placed roughly 1" from the muzzle to prevent the unstable round tumbling, with 1.5" of wood and a bag of concrete behind it to avoid damage to my shed.

I then set up the camera to record the shot, and started turning up the nitrogen reg. At roughly 340 psi, the rupture diaphragm fulfilled its final purpose, and my 1/3 pound hole punch was propelled down the barrel at just over 700 feet per second, hitting the target 24 milliseconds later, and doing this:

Image

Image

Image

Image

Image

Image

Image

After cleanly penetrating the plate and leaving a hole that looks a lot like the hole from a .50 AP round, the hole punch continued on to split a 2x4 in half, fly through a bag of concrete, and punch through the front of my shed. Sideways. I found the punch lying on the floor, bent about 45 degrees off of straight, with a point just as sharp as it had before it was shot. The only thing I can't do is prove that this was actually done with the SCTBDC, and not a .50 rifle with a carbide tipped AP round. You can however, realize that no firearm ammunition capable of doing this is available in my entire country.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
SpudUke5
Sergeant
Sergeant
Posts: 1099
Joined: Tue Sep 04, 2007 10:16 pm

Sun Mar 02, 2008 8:20 pm

Wow vey nice accomplishment :shock:

So... whats next? lol

But in all, very nice shot and this shows that you can teach a old dog (hole punch) new tricks.

New dicovery, 1/4 inch steel isnt bullet proof, now you can make a killing off your gun by mass producing it :D
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Novacastrian
Staff Sergeant 2
Staff Sergeant 2
Posts: 1603
Joined: Sat Aug 11, 2007 6:59 pm
Been thanked: 1 time

Sun Mar 02, 2008 8:28 pm

You bloody ripper, i had a feeling that someone was close to achieving this particular goal. The hole is just so round and pretty :D
You finally realised JSR's facination with your shed too- two birds with one stone!
You have my Kudos plus some!

DYI IS THE KING :P :D :king:
America, the greatest gangster of all time. With 200 million odd foot soldiers at it's whim and call.
When you fill your car with refined oil remember that it has been paid for with blood and guts, some from your own countrymen, most not.
User avatar
pizlo
Corporal 3
Corporal 3
Posts: 783
Joined: Fri Dec 22, 2006 7:27 pm
Contact:

Sun Mar 02, 2008 8:29 pm

I'm speechless, that just... damnit
all that increase from using better ammo?
and what is the picture that looks like a hole in the ground?
just fuck man..
Edit how dare the forum change my post I said fuck I can't express myself without that word.
I'm honored to be posting in this topic.

Edit2 and damn do you have the vid?
brogdenlaxmiddie
Corporal
Corporal
Posts: 562
Joined: Sun Jul 22, 2007 2:19 pm

Sun Mar 02, 2008 8:36 pm

HOLY S#!T

I thought I was a badass by shooting a potato through a solid door....
But this is a whole new level.... BTW- make sure the police don't find the gun... I think it may have been upgraded from a noisy hobby :twisted:
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Sun Mar 02, 2008 8:40 pm

About the vid... For the first time since I shot the original hole in my shed ("Carnage"), my camera recorded, but froze when I stopped recording, failing to save the film. I'll be sure to take lots of pretty videos of shooting through steel plate at the range in the summer, but it's kind of a shame that the first one didn't work. For what small comfort it is, the video wouldn't have shown much anyway.
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
TurboSuper
Corporal 5
Corporal 5
Posts: 986
Joined: Thu Jun 16, 2005 1:44 pm
Been thanked: 1 time

Sun Mar 02, 2008 8:45 pm

Holy shiat :shock:
"If at first you dont succeed, then skydiving is not for you" - Darwin Awards
User avatar
c19o
Specialist 3
Specialist 3
Posts: 356
Joined: Thu Dec 14, 2006 11:59 pm
Location: Fairfield Bay, Arkanasas

Sun Mar 02, 2008 9:02 pm

One word : Wow..... :shock:
User avatar
daberno123
Corporal
Corporal
Posts: 594
Joined: Mon Nov 19, 2007 5:56 pm
Location: Ohio

Sun Mar 02, 2008 9:13 pm

Awesome! I look forward to seeing that whole steel plate full of holes.

Any before and after pics of the hole punch? You said it was still sharp? I'm surprised the tip didn't break off
User avatar
bigbob12345
Staff Sergeant
Staff Sergeant
Posts: 1516
Joined: Sat Dec 01, 2007 9:13 am
Location: Mercer Island,Washington

Sun Mar 02, 2008 9:26 pm

OMG
there isnt much more I can say than that
SpudBlaster15
First Sergeant 3
First Sergeant 3
Seychelles
Posts: 2400
Joined: Wed Oct 18, 2006 11:12 pm
Has thanked: 2 times
Been thanked: 10 times

Sun Mar 02, 2008 9:43 pm

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 6:33 pm, edited 1 time in total.
User avatar
DYI
First Sergeant 5
First Sergeant 5
Antigua & Barbuda
Posts: 2862
Joined: Sat Jul 07, 2007 8:18 pm
Location: Here and there

Sun Mar 02, 2008 9:46 pm

Based on the appearance of the "wound", it appears to normalized.
Don't quite know what you mean here...

And as for a backstop, I might need a bit more than 1/2" plate soon...
Spudfiles' resident expert on all things that sail through the air at improbable speeds, trailing an incandescent wake of ionized air, dissociated polymers and metal oxides.
User avatar
Lentamentalisk
Sergeant 3
Sergeant 3
Posts: 1202
Joined: Tue Aug 07, 2007 5:27 pm
Location: Berkeley C.A.

Sun Mar 02, 2008 9:47 pm

Congrats on reaching GOD status on spudfiles!
That is downright insane!
Next time put more cement behind it and see how far it will go through solid cement... Also you don't want your neighbors calling the cops, saying someone shot an AP round through their window...
Do not look back, and grieve over the past, for it is gone;
Do not be troubled about the future, for it has not yet come;
Live life in the present, and make it so beautiful that it will be worth remembering.
User avatar
bigbob12345
Staff Sergeant
Staff Sergeant
Posts: 1516
Joined: Sat Dec 01, 2007 9:13 am
Location: Mercer Island,Washington

Sun Mar 02, 2008 9:48 pm

Ill try this once I get my KAMG to 500psi I dont expect to succeed but I may Have a chance if I use a really long barrel(30ft or maybey even 40ft)
SpudBlaster15
First Sergeant 3
First Sergeant 3
Seychelles
Posts: 2400
Joined: Wed Oct 18, 2006 11:12 pm
Has thanked: 2 times
Been thanked: 10 times

Sun Mar 02, 2008 10:02 pm

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.
Last edited by SpudBlaster15 on Wed Jul 14, 2021 6:33 pm, edited 1 time in total.
Post Reply